3Si Security Systems AT140720A Asset Tracking and Alert Device User Manual quick reference guide

3Si Security Systems Inc. Asset Tracking and Alert Device quick reference guide

Contents

quick reference guide

Quick Reference Guide3SI Security Systems Innovation That Protects3sitracking.comDirection of Travel/Speed or Stationary# of GPS SatellitesCurrent Voltage - Red Text Indicates Low BatteryGroup Device is Assigned ToTime and Date of DataDevice # & SettingsPing/Reset/Chirp OptionMax. 10 Fences per DeviceClick for a List of Track Data PointsHow Long Device has Been OnTime Since Last Data Point Was ReceivedDevice NameCurrent Firmware VersionHow Long Device has Been TrackingLat/Long LocationON if ChargingHow Often Device will Send New Data During Live TrackingIs Device Emitting Beacon Signal?Device Name & Track ListDeviceClosest AddressBlue highlight indicates device showing on mapDevices Set to Option B or CHibernate OptionLOCATION MAPsupport@3sisecurity.com ESP® Hotline: 888.3SI.TRACK (888.374.8722)01/15 66-0100-101ESO® Electronic Stake Out®Active Devices3SI Security Systems 101 Lindenwood Drive, Suite 200, Malvern, PA 19355 info@3sisecurity.com | 3sisecurity.comTHE INFORMATION CONTAINED WITHIN IS FOR EDUCATION/IDENTIFICATION PURPOSES ONLY. 3SI Security Systems is the righul owner of the informaon and materials, and nothing herein shall grant a license to the informaon and materials provided. Any downloading, reproducon or further distribuon without prior wrien permission of 3SI Security Systems is strictly prohibited.
Choosing your Device Settings is very important. Consider how you plan to deploy the Device, who will be assigned to view information about the Device and receive Alert Messages, how often you want to receive information on the Device’s location, whether it triggers on Motion or Ping, and how long the battery needs to last. Quick Reference Guide for ESO® GPS ProductsMotion SensitivityThe Device can be set to trigger on a variety of continuous motion durations depending on how it’s being used. No Motion ResetThe Device can be set to stop activation and reset after it has been motionless for various periods of time.(Geo) Fencing A fence is a perimeter around an address. Once the fence perimeter is broken by a Device entering or leaving the perimeter, a text or email alert will be generated.Real-time PingIf Real-time Ping is selected, the Device will respond within moments of the Ping command being sent. Note that Real-time ping will reduce battery life. Ping ResetUsers may Reset the Device via the Reset button on the Map Page. If the Device is not manually Reset after being pinged, it will continue tracking until the battery is depleted.A The Acve/Status Device Pane ORB The Device List/Last Locaon FixLogin to access and change Device information or to track Device at 3sitracking.com. Device Settings Select the Device you wish to view/edit either viaChirpUsers may send a command to an active device causing it to emit a chirp sound. Chirping will end after 10 minutes or upon the device receiving a cancel command when the Cancel Chirp button is clicked. BeaconThe default setting for the Beacon is ON. If the Hand Held Beacon Receiver is not required, the Beacon can be turned off by selecting the Turn Beacon Off button.HibernateThe Hibernate functionality allows the User to place the Device into a non-responsive mode. While in Hibernate mode, the Device will not track on motion, report in for an interval setting, respond to a ping command, trigger, or report battery status alerts. Hibernate may be delayed by scheduling to start at a future date and time.Device ChargingThe Device battery is charged using the charger shipped with the Device. It takes approximately two to three hours to fully charge the battery.Low Battery Alert The Device will send a low battery text or email alert to the User designated to receive Device alerts when the battery is 3.7V or lower.Please reference the complete ESO User Manual for detailed instructions.Motion The Device can be set to track on Motion. When Motion is selected, the Device will automatically begin tracking when continuous motion is detected.

Navigation menu