Dedicated Sound and Audio BTA-5 Audio Amplifier User Manual

Dedicated Sound & Audio,Inc. Audio Amplifier Users Manual

Users Manual

!!!! ! ! Operating*Instructions*Manual**ONSIA*๐๐ฅ๐ฎ๐ž๐ญ๐จ๐จ๐ญ๐ก®*Audio*Amplifier**Model*No.*BTA;5*Your*Wall.*Your*Art.*Your*Sound.™*
English 2 INTRODUCTION Thank you for choosing the ONSIA BTA-5 Bluetooth Audio Amplifier powered by Dedicated Sound and Audio. The ONSIA BTA-5 Bluetooth Audio Amplifier is a small form factor audio amplifier with Bluetooth wireless technology and has been designed to be compatible with Bluetooth wireless technology enabled smartphones, laptops, tablets and PCs. The ONSIA BTA-5 Bluetooth Audio Amplifier offers power efficiency audio amplifier design and provides a truly enjoyable listening experience with the added convenience of wireless technology. Please read this operating instructions manual completely before you start using your ONSIA BTA-5 Bluetooth Audio Amplifier. If you have any questions about the operation of the ONSIA BTA-5 Bluetooth Audio Amplifier please contact the Dedicated Sound and Audio customer support at www.dsausa.com. Limitation of Liability DEDICATED SOUND AND AUDIO AND ITS AFFILIATES DO NOT MAKE ANY GUARANTEES, EXPRESSED OR IMPLIED, INCLUDING MERCHANT ABILITY AND FITNESS FOR PURPOSE, WITH RESPECT TO ANY OF THESE SUGGESTIONS OR INSTRUCTIONS. DEDICATED SOUND AND AUDIO SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, LOSS OF USE, COST OF REPLACEMENT, BREACH OF CONTRACT, INJURY, OR ANY OTHER CAUSE WHATSOEVER EVEN IF DEDICATED SOUND AND AUDIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IMPORTANT SAFETY INSTRUCTIONS Read these instructions before using this product. Keep these instructions for future reference. Heed all warnings in this guide. Follow all instructions. Fire and Electric Shock Hazard DO NOT open, dismantle, disassemble or modify your ONSIA Bluetooth Audio Amplifier. DO NOT subject your ONSIA Bluetooth Amplifier to excessive cold, heat, humidity or sunlight. DO NOT block push objects into holes or any openings. FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class-B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This s equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. he dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modi๎€Ÿcations to this device not explicitly approved bymanufacturer could void your authority to operate this equipment.
English 3 SETUP The ONSIA BTA-5 Bluetooth Audio Amplifier comes with an optional remote DC jack and LED cable assembly (CA-1). The following diagram depicts the setup of the amplifier with the optional cable assembly.
English 4 OPERATION 1) Connect Speaker and Power Supply. Connect a 8Ω speaker with 10W RMS minimum power handling capabilities to the cable labeled “SPKR.” Connect a 12V DC power supply (1.2A minimum) to the DC jack located on the amplifier. 2) Power it. Slide the power switch to the ”ON” A blue LED indicator located next to position. When the Bluetooth Audio the DC jack on the optional CA-1 Amplifier is powered ON, you will hear cable assembly will turn ON and will a series of three tones indicating the unit remain ON to indicate the unit is is ready to be paired or play music. powered. 3) Pair it. Play it. Love it! To pair your ONSIA Bluetooth Audio Amplifier, enable Bluetooth on your music source device and scan for Bluetooth devices (read your device’s manual or user’s guide to add or setup a Bluetooth device). Pair your device with the Bluetooth device named “ONSIA BTA-5.”
English 5 TROUBLESHOOTING GUIDE If your ONSIA Bluetooth Audio Amplifier appears to have a problem, the following notes may help. If the problem still persists after having attempted to resolve it, consult your dealer for assistance. Symptom Possible Cause No sound at all -Check amplifier is powered ON. -Check volume and mute settings on music source device. -Check device is paired. -Reset audio amplifier. Slide power switch to the “OFF” position and then back to the “ON” position. Unable to pair device -Check amplifier is powered ON. -Make sure amplifier is not paired to another device. -Place music source device in direct line of sight and within 20 feet. Objects, walls, and moving persons may reduce wireless operating range. -Reset amplifier. Slide power switch to the “OFF” position and then back to the “ON” position. Music breaks, device disconnects -Place music source device in direct line of sight and within 20 feet. Objects, walls, and moving persons may reduce wireless operating range. -If using a streaming music service, try playing music stored in music source device instead. Distortion at high volume levels -Check the recording quality of the music material. SPECIFICATIONS Audio Output Power: 10 watts RMS @ 8 Ω THD (@1kHz): 1% @ 7.5W RMS, 10% @ 10W RMS Frequency Range: 20Hz to 20kHz Bluetooth Version: 4.0 Maximum Wireless Range: 33 feet under ideal conditions (direct line of sight) Supply Voltage: 12V DC Power Consumption: 14.4 W max
English 6 PRODUCT CARE Do not use any solvents or liquids to clean your ONSIA Bluetooth Audio Amplifier. Simply dust unit with a dry piece of cloth. WARRANTY INFORMATION Dedicated Sound and Audio warrants its ONSIA Bluetooth Audio Amplifier products to be free from defects in material and workmanship for one year from the date of purchase. DO NOT attempt to open, dismantle, disassemble or modify the unit; doing so will void its warranty. Except where prohibited by applicable law, this warranty is nontransferable and is limited to the original purchaser. This warranty gives you specific legal rights and you may also have other rights that vary under local laws. In the event of a defect, Dedicated Sound and Audio will, at its option, repair or replace the product with no charge to the purchaser for parts or labor. The repaired or replaced product will be warranted for 90 days from the date of return shipment, or for the balance of the original warranty, whichever is longer. To obtain warranty service, the purchaser must obtain a Return Materials Authorization (RMA) number by calling Dedicated Sound and Audio at 1-800-279-7686. To obtain an RMA number, the purchaser must provide a copy of the original sales receipt. The purchaser must return the product postpaid with the purchaser’s return address and the RMA number clearly printed on the outside of the package to the Authorized ONSIA Service Center provided by Dedicated Sound and Audio with the RMA number. Dedicated Sound and Audio will not be responsible for any losses or damage to the product incurred while the product is in transit or is being shipped for repair. Insurance is highly recommended.
www.dsausa.com ©2014 Dedicated Sound and Audio, Inc. All rights reserved. The DSA logo, the ONSIA logo, Where Technology Listens™, ONSIA™, The Sound of Art™, Sound Art™, and Your Wall. Your Sound. Your Art.™ are trademarks owned by Dedicated Sound and Audio, Inc. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Dedicated Sound and Audio, Inc. is under license. QA-INS-0003 Rev 1

Navigation menu