ISKN TS1E1 Bluetooth Digital Sketch Pad User Manual NOTICE ISKETCHNOTE 01 09 2014xx

ISKN Bluetooth Digital Sketch Pad NOTICE ISKETCHNOTE 01 09 2014xx

Contents

User Manual.pdf

This user guide will help you go through the quick launch of The Sate With the iSketchnote pack, digitize your sketches and notes with the natural keeping the natural feel of pen and paper ____________________________________________ THE SLATE USER GUIDE ____________________________________________ Create, Digitize, Enhance
This user guide will help you go through the quick launch of The Sate INSIDE THE ISKETCHNOTE PACK Cover The Slate Pens USB cord OVERVIEW OF THE SLATE
This user guide will help you go through the quick launch of The Sate THE SLATE AND iPAD SETUP « Open Book » mode “Viewing” mode Standalone mode To put the iPad: > put a first hook > then put the opposite one as the second To put the Slate: The Slate is fixed in the cover with the rubber bands To stand up the iPad cover part: > lift the stand located on the back on the cover by pulling the fabric. Get the Slate out of the cover and use it without your iPad The battery of the Slate could be flat. Charge your device before the first use
This user guide will help you go through the quick launch of The Sate CONNECT THE SLATE WITH A COMPUTER OR AN iPAD 1. iPad: Bluetooth connection ✓ Turn The Slate on by switching the side button to the on-BLE-USB position (refer to the Overview section). The leds blink while the Slate is initializing ✓ Turn the Bluetooth of your iPad on ✓ Pair the devices by tapping the Slate on your iPad. ✓ Rename your Slate to make future connections easier 2. PC or MAC: USB connection ✓ Turn The Slate on by switching the side button to the on-BLE-USB position (refer to the Overview section). ✓ Connect the USB cord to The Slate and then plug it into your computer iSKETCHNOTE APPLICATION INSTALLATION You must have an Internet connection to install the iSketchnote application To download the iSketchnote application for PC and Mac go to www.isketchnote.com/download To install the application on your iPad go to the App Store.
This user guide will help you go through the quick launch of The Sate STANDALONE MODE SETUP (WITHOUT iPAD OR COMPUTER) The Slate can also work in a standalone mode thanks to its embedded battery and flash memory (you can extend this internal memory with a micro SD card) ✓ Switch the side button to the middle position on-standalone (refer to the Slate overview). The leds blink while the Slate is initializing. ✓ When you use a new page, press the « New Page » button of The Slate to create a new document. ✓ To create a new layer just press the “New Layer” button The Slate doesn’t record image type files. You must transfer your data into the iSketchnote application in order to see and enhance your digitized work. To transfer your recorded data : Connect The Slate to the iSketchnote app by Bluetooth or USB and tap the SD Card icon in the upper right corner. A notification tells you if new files are available. Bluetooth Low Energy connection is a limited output communication. Therefore this operation can take some time. It is recommended to upload regularly your files. At the moment you cannot transfer your data directly from your SD Card to your PC without using the iSketchnote application
This user guide will help you go through the quick launch of The Sate iSKETCHNOTE APPLICATION Live Post production All Rolls The Live mode allows you to see in real time the digitization of your sketches and notes. You can also modify the color, width and opacity of your digital rendering as well as erase an unfortunate stroke. Finally you can share your creation with your family and friends. The Post production mode allows you to enjoy the full power of digital by letting you improve, enhance and modify your creation once it’s finished on paper. You can also select, erase and move some parts of your drawing before sharing it. The All Rolls mode is here to let you organize your sketches and notes in different rolls that serve as folders where you can preview all of your past work.. You can create and erase a roll and rename them. You are also able to move a drawing inside a roll or transfer it into another one.
This user guide will help you go through the quick launch of The Sate ____________________________________________ USE A PIECE OF PAPER | NOTEBOOK The Slate works with any kind of paper or notebook. The maximum size should be an A5 format paper. Your piece of paper or your notebook must be put upon the Slate between the 4 dots situated in the corners of the upper face which demarcate the writing surface. Use this marks as points of reference to easily find the initial position of your piece of paper or notebook. If your piece of paper or notebook has moved you should create a new layer in order to help you positioning your support again. ____________________________________________ HOW TO UPDATE THE SOFTWARE OF THE SLATE In order to have the best experience it will be recommended to update regularly the software of the product. This update can be performed from the iSketchnote application. HOW TO UPDATE THE ISKETCHNOTE APPLICATION The iSketchnote application can also be updated to fix any bug or to add some new features. To update the application simply go to the App Store for the iPad application or to www.isketchnote.com/download
This user guide will help you go through the quick launch of The Sate ____________________________________________ USE PRECAUTIONS Despite the care we take to ease of use, several limitations remain: ✓ Do not use the Slate while in transport (train, plane, car …) ✓ Avoid any proximity between the Slate and magnetic objects (such as magnets, iron bars, important metallic surfaces …). Evitez le contact direct avec des objets magnétiques (aimants, barre ou surface importante en acier…). These objects should be at a minimum distance of 25 cm. ✓ Do not use several pens simultaneously. ✓ An unused pen should be at a minimum distance of 15 cm from the Slate. Be sure that these limitations is something we are working on. TROUBLESHOOTING If you ever encounter a problem with the Slate we invite you to follow the procedure below: ✓ Check if a magnetic source is nearby the Slate ✓ Unplug the USB cord if it is plugged then, turn the Slate off and on again. If you are still experiencing some difficulties and need help please go to the FAQs section on our website www.isketchnote.com/faq or contact directly iskn by dropping us a line at: contact@iskn.co
This user guide will help you go through the quick launch of The Sate WARRANTY All the information are available on www.isketchnote.com/terms ISKN 52 cours Jean Jaures 38 000 Grenoble France contact@iskn.co SIRET 80039492600011

Navigation menu