Lingan Intelligent Technology UCC1 Smart center User Manual

Shenzhen Lingan Intelligent Technology Co.,Ltd Smart center Users Manual

User Manual

Smart Center User ManualDear customers, Thank you for choosing our company's productuniversal infrared remote control, which adopted today's emerging Wi-Fi technology and refined so-phisticated manufacturing processes, developed from research experiences integrated from many years. This product can support mobile app to pe-rform local and remote control of household elect-ronic -In order to give y-ou a better experience of installation and usage of- this product, please read this description carefully.I. Product Features1. Support wireless network protocol Wi-Fi2.4GHz802.11b/g;2. SmartLink (demodulation drive) IGRS speedily access network with 2 seconds;3. Status indicator;4. Support all infrared device control;other network;and Zigbee TechnologySuch as air conditioner, television, set top box, DVD stereo and Zigbee devices(such as door lock, curtain, lighting and etc)6. Match the remote control automatically;7. Have the function of learning infrared code;Operating environment: IndoorOperating temperature: -20 -60Operating humidity: 80% RH:III. Figure of the ProductZigbee parameterWireless RF mode frequency: 2445 MhzWireless communication protocol: IEEE802.15.4Working channel: channel 01Indicator lightUSBReset button Click the Power button, there will pop-up a test dialog box: Last step -send the previous command;Send the code again ---- re-send the current command;No, next group ---- send the next com- mandYes, next step ---- click this button to go to next step when the current equipm- ent has response.Second, the models match. Click the brand and each one will be l- IV. Reset Button Function and IndicatorLight Statusa. Restore Factory Defaults Long press reset button after access to power, until the indicator light turns to bluewith quick flash which shows the restore s-uccessful.b. AP configuration modeWhen indicator light shows blue flashing, itmeans the devices is in AP configuration m-ode, and after 2-3 times slowly flash when t-he indicator is off, it means connection is s-uccessful. If the indicator light twinkles con-tinuously, it s disconnected.c. Operation of APP control button has perf-ormed: red light flash.8. Can be laid flat, hang on a wall or magnetic toother places.9.II. Product ParametersInput voltage: DC 5VInput Current: 1AInfrared Frequency: 38 KHzWireless Type: Wi-Fi2.4GHz 802.11 b/gTotal power consumption: 1.2WSelf-organized network10.Connect and control zigbee productsV. APP OperationScan two-dimensional code in instructions and click the "Download" button when the "eFamily" app download page appears. Af-ter the download is complete, click "Install" to f-inish system installation automatical-ly. After installation of this app, click "Expe-rience Immediately" to enter the app, then click "Register" (Please read Terms of ser-vice before re-gistration) and click Next 10. Take air conditioner as an example: follo- wing the operation the page jumps to the list of brand (default), there are 3 options and 4 ways in total on the bottom of this p- age:First, the default mode. Click brand to enter all matching page directly, which will test the switching comman-d of all the devices of this brand one by one till the device response.abeled with its model type, in order to facilita-te the equipment of known model to build new remote control (for example: if you know the air conditioner type is Gree YB-OF2, please select Gree quickly located in the right list, and click YB-OF2 to set new remote control.)Third, intelligent learn. Learning remote control code (required original remote), click intelligent learning to e-nter learning page.Click the key you want to learn, it will send l-earning code to the infrared device which will enter learning state. At this moment, you on-ly need to align the remote control to the infr-ared device and long press the corresponding device key for 1 to 2 seconds. If the control learned the command, there will pop-up a dial-og box in which you can test the learned com-mand. If the command is correct, click save t-o store the command. When all the keys you want to learn has complete, click Finish b-utton on the right top corner to create new re-mote control.step after entering the cellphone number,af-terwards input the verification code the cellph-one received into the box and click "Next step " to set log in password, then click" Finish ".1. .2. 3. Note: Make sure the Wi-Fi name is the same as the cellphone connection.4. 5. When the app displays 1 connected , itmeans that the configuration is successful,now the blue light stop flicking.6. --When connect the power of smart center d evice, the blue light is flashingEnter the app, and click the top right corner+ of home page, and then click quick c- onfigurationEnter WiFi password (Note: please confirm the WiFi name is the same as the cellphoen connection)Click ConfirmThere are 2 icons show on the home page(one is gateway, the other one is IR remote),if this smart center connected to Zigbee devices, please click gateway icon into the controlled page7. to enter homepa-1.Click R remote IconNote: 1. After create a new remote control success-fully, in the home page, the main scene or the sub scene, click the corresponding remote control to control the device. Edit button onthe top right corner is the learning control sw-itch. When you select the learning mode, longpress the button you want to learn to start lea-rning.2. Long press Remote Control button to modify name and remove the remote control, t-he remote control in the main scene cannot b-e delete, and the remote control will appearon the homepage after delete in the sub scene.VI. Common QuestionsQ: What to do if the intelligent household elec- tronic infrared can't be conne- cted?A: a. Check if the cellphone and the device are connecting to the same Wi-Fi.Smart Center1. Any change, correction, abridged or illegi- ble handwriting on the purchase tags or p- roduct instructions.2. Malfunction caused by damage, incorrectconnection or misusage.3. Undesirable phenomena due to the extre- b. Click system set up authority managem- ent to check whether authorized.c. Reset the device. (Long press the reset bu- tton for 3 seconds to reset.)Q: What to do if the device can to be matched with the network?A: a. Check if the password entered by one key configuration is correct.b. Reset the device. (Long press the reset b- utton for 3 seconds to reset.)VII. InstructionsThe one year warranty of our company s pro-duct only applies to the situation that all the o-perations comply with the instructions. The fo-llowing situations are not covered by the warr-anty:Q: How to control Zigbee devicesA: Please refer to Zigbee products Instructions me environment rather than the inherent c- auses of this product (such as lightning, flo- od,fire, etc.)4. This product has been opened or disassem- bled.5. Badness caused by any usage, maintenanc- e or custody not according to the product sp- e cifications (such as moisture, corrosion).6. Product badness, appearance deformation,appearance damage or any other physicaldamage caused by external forces.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.10. Take air conditioner as an example: follo- wing the operation the page jumps to the list of brand (default), there are 3 options and 4 ways in total on the bottom of this p- age: OS APP Android APP(Scan QR code to download our APP)Product name Smart CenterModel UCC1FCC WARNINGThis device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.FCC ID: 2AJK8-UCC15. Support remote/
ZigBee devices products Instructions After connecting Smart Center on the APP Home Page, it will appear 2 icons on the home page, one is bridge icon, another one is infrared device icon Click bridge1 icon, and pulling down the home page, will search out the Zigbee lamps, if having other Zigbee devices also can search out, which will be arranged in the behind the left side of type list. You can fix name or switch control the lamp, group control freely(grouping is that dragging the Zigbee devices icons into the scenes).And you also can control the lamps separately by clicking the single lamp. Click the upper left corner icon back to home page. Click the device icon directly can search other ZigBee devices, appears control interface, operate on the control interface. Click the light icon

Navigation menu