Luxul Wireless XWR1750 Dual Band Wireless AC1750 Gigabit Router User Manual LUX QIG XWR 1750 indd

Luxul Wireless Dual Band Wireless AC1750 Gigabit Router LUX QIG XWR 1750 indd

Users Manual

Simply ConnectedQuick Install GuideXWR-1750Dual Band WirelessAC1750 Gigabit RouterUse the XWR-1750 to: Deliver Next Generation 802.11ac Gigabit Wi-Fi with Speeds up to 1750Mbps Maximize Data Rates with Concurrent Dual-Band (2.4GHz and 5GHz) Technology Optimize VoIP, Streaming Media and Other Demanding Applications Create a Secure Guest Network Provide an Affordable High Performance NetworkAC1750 Gigabit RouterAC1750 Gigabit RouterUse the XWR-1750 to:
Quick Install GuideXWR-175014203 Minuteman Drive, Suite 201, Draper, UT 84020-1685luxul.com | 801-822-54502DUAL BAND WIRELESS AC1750 GIGABIT ROUTERModel Number: XWR-1750 FCC ID: W59XWR1750Quick Install Guide© 2013 Luxul. All Rights Reserved.No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Luxul. The material in this manual is subject to change without notice. Luxul reserves the right to make changes to any product to improve reliability, function, or design. No license is granted, either ex-pressly or by implication or otherwise under any Luxul intellectual property rights. An implied license only exists for equipment, circuits and subsystems contained in this or any Luxul product. DOCUMENT CONVENTIONSThese graphical alerts are used in this document to indicate notable situations: NOTE: Tips, hints, or special requirements that you should take note of. CAUTION: Care is required. Disregarding a caution can result in data loss or equipment malfunction. WARNING!: Indicates a condition or procedure that could result in personal injury or equipment damage.FCC COMPLIANCEThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CONTACT LUXULSalesP: (801) 822-5450 E: sales@luxul.comTechnical SupportP: (801) 822-5450 E: support@luxul.com
Simply Connected© 2013 Luxul. All Rights Reserved.Other trademarks and registered trademarks are the property of their respective owners3PACKAGE CONTENTSThe following items should be included in the box: XWR-1750 Dual Band Wireless AC1750 Gigabit Router 3 Dual Band RPSMA Male Antennas Ethernet Cable Power Adaptor Quick Installation Guide NOTE: If any of the listed items are missing or damaged, please contact the reseller from whom you purchased for return/replacement. HARDWARE DESCRIPTIONXWR-1750 LED IndicatorsIndicator Name Status FunctionWPS LEDON Indicates the XWR-1750 is ready for WPS pairing.5GHz ON Indicates a 5GHz wireless network is broadcasting.2.4GHz ON Indicates a 2.4GHz network is broadcasting.1-4 LED ON Indicates a device is connected to the Ethernet port number. FLASHING indicates data packets are being transmitted to the connected device.Internet LEDON Indicates the XWR-1750 is connected to the ISP.FLASHING Indicates data packets are being transmittedUSB LEDON Indicates a USB enabled device is connected and configured.System LEDON Indicates the XWR-1750 is booting.FLASHING Indicates the XWR-1750 is operating normally.OFF Indicates the XWR-1750 will not bootPower LEDON ON indicates power is applied to the XWR-1750.OFF Indicates power is not applied to the XWR-1750.For future feature additions
Quick Install GuideXWR-175014203 Minuteman Drive, Suite 201, Draper, UT 84020-1685luxul.com | 801-822-54504Rear PanelXWR-1750 Rear Panel View Antenna Ports: 3 RPSMA female antenna ports to connect the included antennas Power Input: Power adapter included NOTE: To hard reboot the router, remove the power adapter. Wait 10 seconds and re-apply power. USB 1 -2 Ports: 2 USB 2.0 ports for connecting USB based printers and hard drives WAN Port: 1 Black RJ-45 Ethernet Port for Internet connection LAN 1 - 4 Ports: 4 Green RJ-45 Ethernet Ports for connecting to the local network NOTE: It is recommended that a Luxul switch be used in conjunction with the XWR-1750 to increase number of local ports available. WPS/Reset Button: Used to confi gure WPS or restore factory default settings CAUTION: Holding the WPS button longer than 10 seconds will result in a factory reset
Simply Connected© 2013 Luxul. All Rights Reserved.Other trademarks and registered trademarks are the property of their respective owners5PREPARING FOR INSTALLATIONSystem Requirements Computer supporting TCP/IP and equipped with a Web browser. Supported Web browser versions include I.E. 9.0, Firefox 3.6, Safari 5.0, Chrome 6.0, Opera 10.6 and up. The Web browser is used to confi gure the XWR-1750. Power must be AC 100-240V~ 1.0A 50/60Hz.XWR-1750 INSTALLATION Desktop InstallationFor use as a desktop device, position the XWR-1750 on a desk or other horizontal surface with adequate room around the XWR-1750 for ventilation. Wall InstallationThe XWR-1750 Is keyholed to allow installation on a wall or ceiling. Use the Mounting Pattern (Page 8-9) for keyhole alignment.Hardware Setup Attach Antennas: Connect the included Dual Band Antennas to all three antenna ports. NOTE: All three antennas should be installed prior to powering up the XWR-1750 and are required for optimal performance. WAN Connection: Connect the Ethernet cable from the modem/router equipment provided by your Internet Service Provider (ISP) to the black WAN port of the XWR-1750. AC Power: Connect the included AC Adapter to the XWR-1750 fi rst and then to the AC outlet.
Quick Install GuideXWR-175014203 Minuteman Drive, Suite 201, Draper, UT 84020-1685luxul.com | 801-822-54506CONFIGURATIONDefault IP AddressThe XWR-1750 default IP address is 192.168.0.1. This address can be changed. However, for hassle free installation of other XenConnect™ plug and play Luxul devices, it is recommended that the default IP value be maintained.Parameter: Default ValueDefault IP address: 192.168.0.1Default user name: adminDefault password: adminConnect a Client DeviceUse a computer or mobile device to connect via Ethernet or wireless to the XWR-1750. The DHCP server on the XWR-1750 is configured by default. If your client device is set to obtain an address automatically, no further configuration is required. Connecting a Wireless Client Device: Connect the client device to one of the XWR-1750 default wireless networks (LuxulXen1750_24 or LuxulXen1750_5X). Both Wireless networks will run in Open Security mode. A passphrase is not required until Wireless Security is configured. Connecting an Ethernet Device: Use Ethernet cable to connect your com-puter or device to one of the XWR-1750 LAN ports. Login Login to the router with the following steps: 1. Open a Web browser, and enter 192.168.0.1. The router login screen will appear.2. Enter the user name and password (default user name and default password are both set as “admin”), and then click “OK” to login to the router configura-tion interface. NOTE: Only devices that support 5GHz will see LuxulXen1750_5X wireless network.
Simply Connected© 2013 Luxul. All Rights Reserved.Other trademarks and registered trademarks are the property of their respective owners7WPS CONFIGURATION/RESET BUTTONUsed to configure WPS (Wi-Fi Protected Setup) or restore factory default settings wTo configure WPS, press and hold the WPS/Reset button until the WPS LED turns on (typically about 5 seconds). The XWR-1750 is now in WPS pairing mode. Follow the pairing instructions for your client device and enter the XWR-1750 WPS pin number (12345678) when prompted. CAUTION: Holding the WPS button longer than 10 seconds will result in a factory reset CAUTION: For optimal security, it is recommended to disable WPS after your client devices have been configured. wTo reset to factory defaults, press and hold the WPS/Reset button until the System LED stops flashing (approximatly 20 seconds). A factory reset will take one minute or more to complete. A successful factory reset is indicated when all of the Port LEDs flash once. When the System LED starts flashing again the unit is ready. CAUTION: Resetting the XWR-1750 to factory defaults will remove all custom settings. NOTE: To hard reboot the router, remove the power adapter. Wait 10 seconds and re-apply power. ADVANCED SETTINGSFor login and advanced settings information go to luxul.com
Quick Install GuideXWR-175014203 Minuteman Drive, Suite 201, Draper, UT 84020-1685luxul.com | 801-822-54508MOUNTING PATTERN
Simply Connected© 2013 Luxul. All Rights Reserved.Other trademarks and registered trademarks are the property of their respective owners9
Quick Install GuideXWR-175014203 Minuteman Drive, Suite 201, Draper, UT 84020-1685luxul.com | 801-822-545010WARNINGS AND SAFTY INFORMATION Read all installation instructions and site survey reports, and verify correct equipment installation before connecting the XWR-1750 to its power source. Verify that the electrical circuits have appropriate grounding and overload protection. Attach only approved power cords to the device. Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment operation specifications. The XWR-1750 is designed for indoor use only. DO NOT place this outdoors. DO NOT install in or near hot or humid places, such as a kitchen or bathroom. Take care to minimize exposure to excessive heat or moisture. Small parts and plastic bags used for packaging may be harmful to small children. KEEP All ACCESSORIES OUT OF THE REACH OF CHILDREN! The XWR-1750 may become hot when in use for extended time periods. This is normal and is not a malfunction. DO NOT install where it will be exposed to paper, cloth or other flammable materials. The XWR-1750 contains no user-serviceable parts. If it is not working properly, contact your dealer and ask for help. DO NOT attempt to disassemble the device.REGULATORY COMPLIANCEThe device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. This equipment also complies with FCC radiation exposure set forth for an uncontrolled environ-ment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during normal operation.Unauthorized antennas, modifications, or attachments could cause damage and may violate regulatory approvals. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment.The equipment version marketed in the U.S. is restricted to usage of channels 1-11 only.Health and Safety RecommendationsWarnings for the use of Wireless Devices: Please observe all warning notices with regard to the usage of wireless devicesPotentially Hazardous Atmospheres: You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders).
Simply Connected© 2013 Luxul. All Rights Reserved.Other trademarks and registered trademarks are the property of their respective owners11Safety in Hospitals: Wireless devices transmit radio frequency energy and may affect medical electrical equipment. When installed adjacent to other equipment, it is advised to verify that the adjacent equipment is not adversely affected.RF Exposure GuidelinesSafety Information: The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices.Warning: Exposure to Radio Frequency (RF) Radiation: The radiated output of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the poten-tial for human contact during normal operation is minimized. The end user must avoid any extended human RF exposure directly in front of the device, up to a distance of 20cm, when unit is on. When servicing the equipment and selecting a location for the antennas, it is important to note that a minimum distance of 20cm is required between personnel and the device or antenna to comply with the radio frequency exposure limit. The antenna used for this transmitter must be installed to provide a separa-tion distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.The following safety precautions should be observed: Do not touch or move the antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the radio.FCC Statement—Wireless FCC 2.4GHz & 5GHz 802.11abgnOperations in the 5.15-5.25GHz band are restricted to indoor usage only.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Information on this document supersedes all previous versions. Products and documents subject to change without notice. Products may be discontinued without notice.LUX-QIG-XWR-175008513053814203 Minuteman Drive, Suite 201, Draper, UT 84020-1685luxul.com | 801-822-5450This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE: (1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.(2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable

Navigation menu