Oticon A S AWRP Assistive listening device User Manual

Oticon A/S Assistive listening device

User Manual

INSTRUCTIONS FOR USEAmigo WRP
2 3Important noticePlease familiarise yourself with the entire contents of this booklet before using your Amigo Wireless Receiver Programmer (WRP). The booklet contains various statements, safety instructions and important information about the use and handling of the Amigo WRP.ContentIntroduction 5Typical package content 6Overview of the WRP 7Preparing your Amigo system 8Inserting the battery 8Charging the battery 9Selecting language and country 11The Amigo receivers 12Changing the pin orientation 13Attaching the universal Amigo receivers to a hearing instrument 14Using Amigo with the Sumo R7 receiver 15Synchronising Amigo receivers 16Accessing the Programming Menus 18Overview of the menus of the R1/R2 19Programming Amigo R1/R2 Receivers 20Using the FM Channel Wizard (T20/21/WRP 24
4 5WRP Special functions 26LED/Display legend 27Cleaning the T20/T21 28Appendix A: Troubleshooting 29Appendix B: Manufacturers’ warranty 30IntroductionCongratulations on your decision to take the next step in improving classroom FM. The Amigo product family is extremely versatile, making life easier for users in school settings. The Amigo transmitters and receivers can be used with virtually all Behind-the-Ear hearing instruments, as well as cochlear implants.
6 7Typical package contentNavigation buttons on the WRPSYNC acts as the “ENTER” button“C” acts as the “CLEAR/EXIT” button.◄ exits a menu while saving.WRP ChargerEarphonesIFULED status indicatorON/OFF/Mute2.5 mm microphone jackHigh resolution LCD displayClear entered values (“C”)Synchronise receiver/enter3.5 auxiliary audio input jack“MiniB” USB charge jackOverview of the WRPAA battery
8 9Preparing your Amigo systemInserting batteryRemove the battery lid on the back of the WRP and insert the rechargeable battery - remember to position the battery according to the markings (+/ -) on the label.Then replace the battery lid. The WRP can then be used to charge the battery that came in the package.Note: The positive and negative ends of the battery may appear similar, so doublecheck that the battery is positioned correctly.Charging the batteryTo charge the battery, plug in the charger as shown in the picture.The Amigo WRP uses one AA rechargeable NiMH battery, which must be charged for at least 14 hours before being used for the first time.The WRP offers failsafe charging, which prevents alkaline batteries being charged.Charging ErrorCheckBattery!The display on the WRPwill indicate when the unit is charging. Also, the LED will turn on and shine green. Note: With a typical user pattern it is recommended to replace rechargeable batteries once every year, because the battery capacity decreases each time it is charged.Battery charging
10 11Select language and country (first time only)Turn the WRP on by pressing and holding the On/Off button for two seconds.Press ▲ or ▼ to select language, and confirm by pressing the SYNC button.To select your country, use the ▲ or ▼ buttons, and confirm by pressing the SYNC button.Select Language English Francais Deutsch • • •Select Country United States Canada Germany • • •If you do not have time to charge the battery that came with the WRP, you can replace the battery with any of the following:• Special “silver-banded” rechargeable batteries (Only available through your Hearing Care Professional, these are the only batteries that can be recharged inside the transmitter.)• Standard, rechargeable NiMH batteries These cannot be recharged inside the transmitter, but must be charged in a separate charger.• Standard, non-rechargeable alkaline batteries Can be used in an emergency, i.e. if you don’t have time to charge your rechargeable batteries. Alkaline batteries cannot be recharged. Note: Always dispose of old batteries in approved battery disposal bins. For more information please consult your Hearing Care Professional.Note: Selecting a country will also select a predefined channel list, which contains all of the channels approved for use in that country.Warning: Only use channels legal in your country.
12 13LED status indicator3-position mode switchChannel seek/toggle (R2 and R7 only)Note: Since Amigo receivers draw power from the hearing instrument battery, there is no reason to try to open the receiver casing. Never attempt to do this.Changing the pin orientationIf the pins on the Amigo receiver do not match the holes on the audio shoe, they can be rotated in steps of 90°. Simply pull the tab on both sides of the receiver back simultaneously, move the pins and push the tab back in.Amigo receivers can be positioned with the LED facing to the front or the back.Note: To ensure optimal antenna performance, the Amigo receivers must be positioned with the LED facing either to the front or to the back.The Amigo ReceiversEuropin connectorEuropin rotation lock
14 15Attaching the universal Amigo receivers to a hearing instrumentAmigo R1 and R2 receivers are attached to the hearing instrument via an audio shoe.First attach the receiver to the audio shoe. Then attach the audio shoe to the hearing instrument.SUMO DM with the dedicated, Amigo R7 receiver.Using Amigo with the Sumo receiver• Sumo detects the receiver and disables the telecoil if the receiver is on.• Operate the receiver from the hearing instrument2 = FM only1 = FM+Hearing instrumentM = Hearing instrument onlyThe use of the telecoil with the receiver attached requires that the receiver is set to the off position.Note: To obtain information about connecting your Amigo to Cochlear Implants, please consult your Hearing Care Professional.
16 17Synchronising Amigo receiversConnect the receiver to a hearing instrument, and turn it on. Check that the receiver switch is set to the correct mode, i.e. FM only or FM+HA mode. Off FM-only FM+HAWithin a distance of approximately 50 cm, press the SYNC button. The LED on the transmitter will then blink three times, and the SYNC logo will appear on the screen.If the synchronisation is successful, the receiver will also blink three times.Note: The switch on the receivers can be disabled, so use the WRP or the T20/T21 to check the status. In its default setting, the receiver switch is enabled.When the receiver’s LED is on, it confirms that:• The hearing instrument battery is ok• The receiver is on• The transmitter and receiver are working in perfect harmony• The child is on the right channel
18 19Accessing the Programming Menus• To access the Amigo Fitting Menus, press and hold both the C (on the keypad) and ON/OFF buttons for 2 seconds.• In the Menu screen, use the ▲ or ▼ keypad buttons to choose View/Program WRP, View/Program Receiver, or FM Channel Wizard. Within each of the 2 primary menus, press ◄ to return to the Main Menu screen.• To exit from the Programming menus, press and hold both the C (on keypad) and ON/OFF buttons.Overview of the menus of the R1 and R2 Amigo R1 #012345689 Ear: RightFM Gain: +0FM+ HA Gain: +10Default Channel: Last Used3-Pos. Switch: Locked: FM+HALED Light: EnabledBeep Tone: MidBeep Volume: MidDe-Emphasis EnabledReset SettingsAbout Amigo R1 Amigo R2 #012345689 Ear: RightFM Gain: +0FM+HA Gain: +103-Pos. Switch: Locked: FM+HALED Light: On: BlinkBeep Tone: MidBeep Volume: MidChannel Button: EnabledChannel Set: See ListChannel Seek: DisabledDe-Emphasis: EnabledReset SettingsAbout Amigo R2ON/OFF“C” Amigo WRP Fitting MenuView/ProgramReceiverFM ChannelWizard
20 21Programming Amigo R1/R2 ReceiversA. A. To assign receiver Name (i.e., child’s name), use the keypad buttons ▲ ▼◄ ► tonavigate. Delete the current name by pressing ◄, while standing on the top line. Space can be inserted between names by pressing ►. Within this screen, use the keypad buttons to select the desired character, then press the SYNC button to save each character. To SHIFT, highlight SHIFT and press the SYNC button. When finished, highlight SAVE and press the SYNC button. To exit and cancel, press the C (CLEAR) button.B. Assign Ear. Select Right or Left using ▲ ▼ buttons. Press the ◄ button to save and exit.C. Choose FM Gain. Default setting is 0. Use ▲ ▼ to navigate and change gain value. When finished, press the ◄ button to save and exit.D. Choose FM+HA Gain; default is +10. Use ▲ ▼ to navigate and change gain value. When finished, press the ◄ button to save and exit.E. 3 position switch: You can lock the user switch to a single function, or set to unlock. Use ▲ ▼ to navigate and press SYNC to select. When finished, press ◄ to save and exit.Programming Amigo R1/R2 ReceiversPlace one R1/R2 receiver within 20-40 cm of the transmitter. The receiver must be turned on and connected to a live hearing instrument or CI adaptor. Open the View/Program Receiver menu by using the ► keypad button. The transmitter will ‘find’ the receiver and display its name or serial number. Press ► to continue.NOTE: Maintain the receiver in the same posi-tion during the entire programming sequence. Each time you change a default setting, the programmer will send that setting to the receiver.
22 23F. LED light: Default is steady ON. Choose blink or disable (off). Use ▲ ▼ to navigate and change selection, then press SYNC. When finished, press ◄ to save and exit.G. Beep tone: Use ▲ ▼ to choose the frequency/tone of the beep and press SYNC to save selection. When finished, press ◄ to save and exit. H. Beep vol: Change the loudness level of the beep tone or disable the beep (off). Use ▲ ▼ to navigate and press SYNC to save selection. When finished, press ◄ to save and exit. I. Default Channel (R1 only): Choose the default channel for the receiver when it is turned on. The default is ”last channel used”. Use ▲ ▼ to navigate and press SYNC to make selection. When finished, press ◄ to save, and exit. J. Channel button (R2 only): Choose enable or disable, press SYNC to save then press the ◄ button to save and exit. K. Channel set: The Default is Select All. To select discrete channels, choose CLEAR ALL (use SYNC button) then scroll ▲ ▼ to the desired channel and press SYNC for each channel. When finished, press ◄ to save and exit.L. Channel seek (R2 only): Enable or disable the manual channel change toggle button on the receiver. M. De-emphasis: Disable this function when using Amigo receivers with other manufacturers’ FM transmitters. See Fitting Guide for more informationN. About Amigo R1/R2: Press ► to view serial number. To exit, press SYNC or ◄.
24 25Using the FM Channel Wizard (T20/T21/WRP)The Channel Wizard will help you find interference-free primary and team teaching channels. Prior to starting the Channel Wizard: • Obtain the monitor earphones• Turn on all FM sources in the building/roomA. Scan and Select Channel Set: Press ► to begin the scanning process. The Channel Wizard will scan through all Amigo channels. Upon completion, a list of available channels will be created. Unusable channels will be greyed out. You can accept the entire list by highlighting Select All, or choose Clear All. Then scroll to select a limited number of channels from the list of usable channels by pressing SYNC. Press ◄ to save and exit.Note: Carry out the scan at a time in accordance with typical school usage schedule.B. Monitor Single Channel: This function allows you to monitor the quality of a single channel. Press ► to access the menu and insert the Monitor earphones into the audio jack on the bottom of the transmitter. You can increase the volume by pressing ► to highlight the headphones icon. Highlight the channel then press ▲ ▼ to scroll and select the desired channel to monitor. Listen for interference; if detected, you may wish to change the primary channel used in that classroom. Note: Make sure you have removed the microphone cord on the monitoring transmitter. FM Channel WizardScan & SelectChannel Set
26 27LED / Display legendThe LED on the WRP indicates the following:LED: Display Meaning:Steady red OnFlashing red burst SynchronisingSteady green ChargingBlinking green Low batteryOff Off or errorBattery chargingFeature How toChange channel Press and hold ▲ or ▼. The channel will then blink. You can change it by pressing ▲ or ▼. Press the SYNC button to save.Synchronise Amigo receivers Within a distance of approx. 50 cm, Amigo receivers can be synchronised by pressing the SYNC button.Lock the keypad To lock the keypad, press for three seconds. To unlock the keypad, press again for three seconds.Monitor a single channel You can use earphones to hear what the child is hearing. First unplug the microphone and then insert the earphone’s jack into the aux input.WRP special functions
28 29Cleaning of the WRPThe WRP is moisture repellent, making it very easy to clean with a damp cloth.Oticon recommends cleaning on a regular basis.Appendix A: TroubleshootingProblem SolutionThe battery will not charge Check that it is positioned correctly. Make sure that it is the “silver-sleeved” recharge-able type of battery, as this is the only type the WRP will charge (for safety reasons).The receivers cannot be synchronised Synchronisation takes place wirelessly, so if the receiver fails to confirm (with three blinks of the LED), try to move the WRP closer, further away or a little bit to one side. Then press the SYNC button again.Interference If interference is encountered on a channel, change to another channel. Press ▲ or ▼ to change channel.For assistance with troubleshooting or answers to other questions please consult your Hearing Care Professional.
30 31Appendix B: Manufacturers’ warrantyThe manufacturer, Oticon, issues a one-year limited warranty to the original consumer of this product.This warranty comes into effect upon the date of original purchase of this equipment, and will remain in effect for one calendar year from that date.Please notice that extended warranties may apply in your country. Please contact your local Hearing Care Professional for more information.What is covered by this warranty?Any electronic component which, because of workmanship, manufacturing or design defects, fails to function properly under normal use during the life of this warranty will be replaced or repaired at no charge for parts or labour when returned to the point of purchase. Transportation is paid by the customer. If it is determined that repair is not feasible, the entire unit may be replaced with an equivalent unit upon mutual agreement of the Hearing Care Professional and customer.What is not covered by this warranty?This one-year limited warranty does not cover:• Malfunctions resulting from abuse, neglect or accident.• Peripheral accessories as itemised within the product brochure, when such items are later than 90 days from the original purchase.• Batteries.• Instruments connected, installed, used or adjusted in a manner contrary to the instructions provided.• Consequential damages and damages resulting from delay or loss of this instrument. The exclusive remedy under this warranty is strictly limited to repair or replacement as herein provided.• Products damaged in transit unless investigated by the shipper and returned to the warrantor with the investigation report.The manufacturer reserves the right to make changes in the design or construction of any of its instruments at any time without incurring any obligation to make any changes whatsoever on units previously purchased. This warranty is in lieu of all other expressed warranties by the manufacturer. No representative or person is authorized to represent or assume for the manufacturer any liability in connection with the sale or use of this product other than as set forth above.If your Amigo system requires service under the terms of this warranty, carefully package the instrument to prevent damage in transit and return it to the point of purchase. Include a detailed description of the problem, your full name, billing and shipping address and telephone number.
32 33The above warranty does not affect any legal rights that you might have under applica-ble national legislation governing sale of consumer goods. Your point of purchase may have issued a warranty that goes beyond the clauses of this limited warranty. Please consult your point of purchase for further information.Hereby Oticon declares that this Amigo is in compliance with the essential require-ments and other relevant provisions of Directive 1999/5/EC. Declaration of conformity is available at Oticon A/SKongebakken 9DK-2765 SmørumDenmark.Date of purchase: Amigo serial numbers: Microphone: Receiver left: Receiver right:www.oticon.comWaste from electronic equipment must be handled according to local regulations.Oticon A/S 9, Kongebakken DK-2765 Smørum0543 ID: U28AWRPIC: 1350B-AWRP
906 68 710 00 / 11.10 Printed in Denmark
906 68 710 00 / 11.10 Printed in DenmarkWarnings Amigo parts can be dangerous if swallowed:• The Amigo system is not a toy and therefore should be kept out of the reach of children and anyone else who might swallow parts or otherwise cause injury to themselves. Special attention should be paid to the smaller components in order to prevent children from swallowing them and choking. • Never change the battery and never connect the receiver to the hearing instrument in front of infants, small children or persons with learning difficulties.If a part is swallowed, see a doctor immediately.
Risk of harm caused by unintentional noise that may muffle important signals System dysfunctions: The Amigo system will cease to function if the batteries have run out. The system may also produce a high whistling noise (feedback) if the battery is low, or if it is subjected to loud sound while the microphone is off but the receiver is still on. Users should be aware that these sounds should not be confused with warning sounds – e.g. car horns in traffic. Use in aircrafts: • Amigo should not be used on aircrafts without the permission of the flight crew.InterferencePlease note that Amigo can cause interference with other medical devices. Such interference can also be caused by radio signals, power line disturbances, airport metal detectors, electromagnetic fields from other medical devices and electrostatic discharges.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation Battery use:• Always use NiMH rechargeable batteries or alkaline batteries.• Always use batteries recommended by your Hearing Care Professional.• Never attempt to recharge non-rechargeable batteries. • Never dispose of batteries by burning them. There is a risk they will explode and cause serious injury.Safety requirements regarding Direct Audio Input (DAI) • The safety of the use of Amigo with DAI (Direct Audio Input) is determined by the external signal source. When the DAI is connected to mains-operated equipment, this equipment must comply with IEC-60065, IEC-60601 or equivalent safety standards.

Navigation menu