Powertech Co R9P602NI Surge Protective Devices User Manual RF PowerLink 125A6 602NI 20120824

Powertech Industrial Co Ltd Surge Protective Devices RF PowerLink 125A6 602NI 20120824

User Manual

User ManualAll Versions© Copyright 2012The information contained herein is subject to change without notice.The information contained herein is subject to change without notice.This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent.August 2012R9P014 / R9P125A6Z8 / R9P602NIZ8GREEN POWERLINKSmart Energy Monitoring &Surge Protecting Solution
TABLE OF CONTENTSINTRODUCTION........................................................................... 2FEATURES AND FUNCTIONS ...................................................... 3INSTALLATION............................................................................ 8Wireless Setup Range................................................................... 8Install Wall Tap Surge Protector................................................... 8Install Strip Surge Protector ........................................................ 8INITIAL SETUP ........................................................................... 9Install Battery in Energy Monitor ................................................ 9Use an AC/DC Adapter (Included)................................................ 10Wall Mount the Energy Monitor................................................... 10Perform Energy Monitor Initial Setup ........................................ 10Currency and Electricity Setup ................................................................... 10Carbon Emission Setup .............................................................................. 11OPERATION................................................................................ 12Energy Monitor Display and Control............................................ 12Change channel to monitor different surge protectors............................... 13Turn ON/OFF the energy saver outlets on the surge protector .................. 14View real time and projection energy consumption .................................... 15View Real Time energy information for the channel ................................... 16View projection energy information for the channel.................................... 16View accumulation energy consumption...................................................... 17View total day energy accumulation for the selected channel.................... 18View total month energy accumulation for the selected channel............... 18View total year energy accumulation for the selected channel .................. 19Exit energy accumulation mode for the selected channel.......................... 19Surge events counter with sound alert........................................................ 20Add Channels to the Energy Monitor by Learning....................................... 20Add Channels to the Energy Monitor by Learning........................ 20Reset the Energy Monitor to Factory Default ............................... 21INTRODUCTIONThank you for purchasing the GREEN POWERLINK Energy Saving Solution, aninnovative product which is designed to manage home electricity usageefficiently and reduce home electricity bill.In an effort to reduce your electricity bills, why not first check out whatappliance uses most energy in your home.The New GREEN POWERLINK Energy Monitor allows you to take control ofhome electricity usage while saving you money in the process.With GREEN POWERLINK, you can see how much electricity you are using andwith greater awareness you’ll become more energy efficient.Fully educated with the critical energy information, you are naturally motivatedto adopt new energy saving habits and reduce harmful carbon emission for ourenvironment.Besides energy conservation, the GREEN POWERLINK surge protectors are alsoequipped with fireproof Surge MOV technology and this ensures your homeappliances are well protected and free of fire hazard during catastrophic surgeevents.The GREEN POWERLINK is the total solution for green inspiration, energyconservation, and surge protection for your everyday life.GREEN POWERLINK Manual All Versions V1.01GREEN POWERLINK Manual All Versions V1.02
FEATURES AND FUNCTIONSGREEN POWERLINK Manual All Versions V1.03GREEN POWERLINK Manual All Versions V1.04Smart Energy Monitor FeaturesTop View Front View Side View Back View1. RESET Key : restore factory default2. LEARNING Key: add new channel3. Channel indicator4. Indicates ON/OFF status of CH’s energy saver outlets5. Energy Monitor low battery indicator6. Wireless Signal indicator7. Surge event counter display8. Real time and projection energy display mode9. Energy Consumption display10. Energy Cost display11. CO2 emission display12. Real Time and accumulative energy usage indicator: the plug icon flashes according to energy usage. The more energy you use, faster the icon flashes13. Embedded alarm speaker14. CH & cursor selector key15. MODE Key : switch between real time, projection and accumulation energy display16. ON/OFF Key : turn on/off the energy saver outlet SET Key : confirmation button17. AC/DC power adaptor input18. Battery compartmentSmart Energy Monitor SpecificationRadio Frequency 915MHzWireless RangeLCD DimensionReplaceable BatteryAC/DC Adaptor InputOperating TemperatureStorage Temperature915MHzUp to 100 FtYesYesUp to 9 ChannelsYesYes45mm x 55mmAA Battery X49V AC/DC adaptor included5℃~45℃ at 85% relative humidity‐5℃~60℃ at 85% relative humidityControl Energy Saveroutlets ON/OFFAudible Alarm AlertChannels controland monitoringLearning FunctionWall MountableFunctions    R9P014
GREEN POWERLINK Manual All Versions V1.05GREEN POWERLINK Manual All Versions V1.06Strip Type Surge Protector Features1. Wireless Antenna - External antenna for better reception2. AC Power Cord3. Overload Resettable Circuit Breaker - Protects against current overload at 15 Amps - Press to reset the circuit breaker4. Surge Protection LED Indicator - The lighted green LED indicates the surge protection is working5. Grounded Fault LED Indicator - The Red LED light only illuminates to indicate the power outlets are not properly grounded6. 2 “Always On” outlets - Provide continuous power for connected devices7. Manual ON/OFF & LEARNING Key - Manual ON/OFF Mode: press the Manual ON/OFF Key to turn ON/OFF the energy saver outlets - Learning Mode: press the LEARNING key to pair up the surge protector with the energy monitor8. 4 “Energy Saver” outlets - The Energy Saver outlets can be wirelessly turned ON/OFF by the smart energy monitor to eliminate stand-by power waste9. Secondary Protection (Optional) - Phone / Data line or Coax protectionWall Tap Surge Protector FeaturesWall Tap Surge Protector Specification1. Surge Protection LED Indicator - The lighted green LED indicates the surge protection is working2. Manual ON/OFF & LEARNING Key - Manual ON/OFF Mode: press the Manual ON/OFF Key to turn ON/OFF the AC outlet - Learning Mode: press the LEARNING key to pair up the surge protector with the energy monitor3. AC Outlet - Monitor individual home appliance electricity usageRadio FrequencyWireless RangeEnergy Saver OutletAC RatingSurge Suppression RatingClamping VoltageSurge Protected LED IndicatorEnergy Saver Outlet Power ON LED IndicatorManual ON/OFF , LEARNING KeyStand-by PowerOperating TemperatureStorage Temperature915MHzUp to 100 Ft115A / 125V / 1875W180J500VGreenGreenyes< 1 W5℃~45℃ at 85% relative humidity-5℃~60℃ at 85% relative humidityR9P125A6Z8 R9P602NIZ8
GREEN POWERLINK Manual All Versions V1.07GREEN POWERLINK Manual All Versions V1.08Strip Type Surge Protector SpecificationRadio FrequencyWireless RangeAlways On OutletsEnergy Saver OutletsAC RatingSurge Suppression RatingClamping VoltageSurge Protected LED IndicatorGrounded Fault LED IndicatorAlways On LED IndicatorExternal AntennaManual ON/OFF , LEARNING KeyStand-by PowerOperating TemperatureStorage Temperature915MHzUp to 100 Ft2415A / 125V / 1875W640J400VGreenRedGreenYesYes<1 W5℃~45℃ at 85% relative humidity-5℃~60℃ at 85% relative humidityINSTALLATIONWireless Setup RangeThe energy monitor and surge protector communicate in two-way. To ensure energy monitor and surge protector communicate with no interruption, please locate and setup both devices within 100 Ft of range.Install Wall Tap Surge ProtectorThe single outlet wall tap surge protector allows the user to track electricity consumption of individual home appliance and protect it against surge and voltage spikes.1. Plug in the wall tap surge protector to a powered 125V AC outlet.2. Plug in the appliance into the wall tap surge protector outlet.3. The outlet power can be manually turned ON/OFF by pressing the “Manual ON/OFF” button on the wall tap surge protector. You may also turn ON/OFF the outlet power remotely by using the energy monitor (see the operating instruction – channel mode).Install Strip Surge ProtectorThe strip type surge protector allows the user to track electricity consumption of group home appliances by area and protect them against surge and voltage spike.1. Connect home appliances to the “ENERGY SAVER” outlets. These outlets are for appliances which do not need to be on all the time and can be completely turned off when not in use to eliminate stand-by power waste. The “ENERGY SAVER” outlets can be controlled ON/OFF by remote energy monitor (see the operating instruction – channel mode).2. Connect home devices to the “ALWAYS ON” outlets. These outlets are not switchable and provide continuous power for appliances which always need to stay on at all time.
GREEN POWERLINK Manual All Versions V1.09GREEN POWERLINK Manual All Versions V1.0103. Plug in the AC power cord of the strip surge protector to a powered 125V AC outlet.4. The “ENERGY SAVER” outlets power can be manually turned ON/OFF by pressing the “Manual ON/OFF” button on the strip surge protector.Wall Mount the Strip Surge Protector1. There are mounting holes on the back of the strip surge protector for wall or base board mounting. 2. Install screws (not included) on wall or baseboard surface (leaving at least 1/4 inch of the screw exposed).3. Place and secure the Surge Protector on mounted screws.INITIAL SETUPInstall Battery in Energy MonitorOpen the battery compartment on the back of the energy monitor and install 4 x AA 1.5V alkaline batteries with right polarity.Warning: Reversing the polarity may damage the product.Once batteries are installed, the energy monitor will turn on and enter initial setup mode. Please proceed and refer to the next instruction for initial setup.Note: Batteries are not included in the product kit.Please do not mix and match different types / new & old batteries in use with the energy monitor.Use an AC/DC Adapter (Optional)The energy monitor can operate with a 9V AC/DC adapter, which can be purchased separately.When the AC/DC adaptor is used in conjunction with batteries installed, the energy monitor will be powered by the AC/DC adaptor to save batteries life in the energy monitor.Wall Mount the Energy Monitor1. Select a spot within the wireless range to mount the supplied wall bracket for the energy monitor.2. The ideal locations for the energy monitor wall mount are entrance of a room or location where the energy monitor can be easily seem and accessed.3. Use adhesive tape or supplied screws to securely attach the supplied wall bracket to a wall.Perform Energy Monitor Initial SetupPlease perform the following initial setup steps for first time operation1. Date & Time Setup2. Currency SetupNote: During anytime, you may press the SET button for 3 seconds to enter setupmode and change currency, electricity rate, and carbon emission rate.Currency and Electricity Setupevent your local utility uses a tariff calculation other than flat electricity rate,please key in the average rate that most nearly resembles your utility’s tariffschedule.
GREEN POWERLINK Manual All Versions V1.011GREEN POWERLINK Manual All Versions V1.012Currency and Electricity Setupevent your local utility uses a tariff calculation other than flat electricity rate,please key in the average rate that most nearly resembles your utility’s tariffschedule.1. The $ symbol blinks first. Use the arrow key to select currency symbol in $ /€ /£2. Press the SET button to proceed to Electricity Utility Rate setup.3. The electricity rate value blinks. Use the arrow key to change the rate value.4. Press the SET button to proceed to Carbon Emission setup.Note: The default Currency is US dollar and default Electricity rate is 0.12¢perKWH.Carbon Emission SetupCarbon dioxide is emitted in the process of producing electricity by burning coal& fossil fuel. This is usually referred to CO2 footprint or carbon emission, whichin turn has contributed global warming and caused abnormal weather.The average carbon emission rate is 0.49Kg (1.08 lbs) of carbon emission forevery 1 KWH of electricity produced. This can be changed depending upon yourlocal electric utility. Please contact your local utility for carbon emission rate.The average carbon emission rate is 0.49Kg (1.08 lbs) of carbon emission forevery 1 KWH of electricity produced. This can be changed depending upon yourlocal electric utility. Please contact your local utility for carbon emission rate.1. The Kg symbol blinks first. Use the arrow key to select the weight symbol in Kg or LB. Then press the SET button to proceed to carbon emission rate setup.2. The carbon emission rate blinks. Use the arrow key to change the value. Press the SET button to finish initial setup.Note: The default Carbon emission rate is 0.49Kg of carbon emission for every1KWH of electricity produced.OPERATIONEnergy Monitor Display and ControlThe user friendly energy monitor allows user to monitor and control up to 9energy tracking surge protectors.Discover home energy use by viewing real time, projection and accumulationenergy information in Watts, KWH, Cost, and Carbon emission. Save money byadopting new energy saving habits and eliminating stand‐by power waste.
GREEN POWERLINK Manual All Versions V1.013GREEN POWERLINK Manual All Versions V1.014Change channel to monitor different surge protectorsThe energy monitor can monitor up to 9 energy tracking surge protectors. EachCH number represents an energy tracking surge protector.Use the arrow key to change the channel from CH1 to CH9 to ALL channels. WhenCH number is changed to ALL, the energy consumption of ALL available Channelswill be displayed.The energy monitor will not display energy information when the selectedchannel does not exit.Turn ON/OFF the energy saver outlets on the surge protectorThe energy monitor can display the ON/OFF Status of the energy saver outlets onthe surge protector.To avoid turning on or off the energy saver outlets by accident, the ON/OFFfunction can only be accessed in real time mode.In real time mode, use the ON/OFF Key on the energy monitor to turn ON andOFF the energy saver outlets of the surge protector.
GREEN POWERLINK Manual All Versions V1.015GREEN POWERLINK Manual All Versions V1.016View Real Time energy information for the channelIn Real Time Mode, the energy monitor will display instant energy consumptionin Watts, energy cost in $/hr, and carbon emission in Kg/hr.View projection energy information for the channelThe energy monitor reads your device energy usage continuously while yourdevice is on and off, and calculates the projection energy information base on realtime and historical measurements.We suggest let the energy monitor measure device several typical use cycles, andthe projection energy information will be more accurate.In Projection Mode, the energy monitor will display energy consumption in KWH,energy cost in $, and carbon emission in Kg.Use the MODE key to change from daily / monthly / yearly projection energyinformation.View real time and projection energy consumptionThe energy monitor provides real time and projection energy information. Pressthe MODE button to scroll thru different energy information display. Real Time → Daily Projection → Monthly Projection → Yearly ProjectionD AY Month Year
GREEN POWERLINK Manual All Versions V1.017GREEN POWERLINK Manual All Versions V1.018View total day energy accumulation for the selected channel1. The energy monitor will first display DAY 01 for 3 seconds, then display the total energy accumulation data for 10 seconds in repeat cycle.2. After 24 hours, the energy accumulation display will advance to DAY 02 and display the total energy accumulation data.Note: the plug icon flashes repeatedly as an accumulation mode indicatorView total month energy accumulation for the selected channel1. When the total energy usage accumulates over 30 days, it will move and store the total energy accumulation data in MONTH database, and the DAY accumulation data will be reset to 0 from DAY 01.2. Press the MODE button to switch and view the total energy usage accumulation from DAY and MONTHView total month energy accumulation for the selected channelView accumulation energy consumptionThe energy monitor provides energy usage accumulation display. This allows youto view total accumulation energy usage in day, month and year for each channel.Activate the energy accumulation mode for the selected channel1. Select the channel you wish to acquire energy usage accumulation. You can active the energy usage accumulation for each channel in different time.2. In DAY mode, press the MODE button 3 seconds to activate the energy accumulation mode.D AYD AY MonthD AYD AY D AYD AY
GREEN POWERLINK Manual All Versions V1.019GREEN POWERLINK Manual All Versions V1.020Surge events counter with sound alertWhen energy tracking surge protector encounters surge events, the energymonitor will count and display the frequency of surge events with audible alert.With the surge events counter display, if surges happen very frequently in shortperiod of time, this will allow the user to be aware and take the necessary actionsor have the technician to check your home electricity circuitry.Add Channels to the Energy Monitor by LearningThe energy monitor and the energy tracking surge protector in the kit arepre‐paired and ready to use.You can purchase more compatible energy tracking surge protectors and expandup to 9 CH by adding to the exiting energy monitor.1. Hold the energy monitor close to the energy tracking surge protector.2. In the energy monitor channel mode, use the arrow key to select which channel you wish to add the energy tracking surge protector.3. On the energy tracking surge protector, press and hold the LEARNING button for 3 seconds until the green LED indicator light flashes and goes into learning mode.Note: you can release the button once the indicator light goes flashingView total year energy accumulation for the selected channel1. When the total energy usage accumulates over 12 months, it will move and store the total energy accumulation data in YEAR database, and the MONTH accumulation data will be reset to 0 from MONTH 00.2. Press the MODE button to switch and view the total day energy usage accumulation from DAY, MONTH and YEAR.Exit energy accumulation mode for the selected channel1. In DAY accumulation mode, press the MODE button 3 seconds to exit the accumulation mode to DAY projection mode.2. Channel energy usage will still be accumulated and store in device’s database.Month Year
CAUTION:To assure continued FCC compliance:Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.4. Within 10 seconds, press the LEARNING button on the energy monitor to add energy tracking surge protector to the selected channel.5. The Surge Protector will beep once to confirm that it has been successfully added to the channel on the energy monitor.6. Redo step 3~5 if learning is not successful.7. Repeat step 2~5 to add more energy tracking surge protectors to different channels on the energy monitor.Reset the Energy Monitor to Factory DefaultPlease follow the instruction below to reset the energy monitor to its factorydefault setting.Note:By performing resetting energy monitor to factory default, all saved data, setup &channel settings will be erased.1. Locate the reset point on top of the energy monitor.2. Push a stylus or pen into the reset point for 5 seconds.3. The energy monitor will be hard reset to factory default setting. Please perform all the necessary setup and channel setting.GREEN POWERLINK Manual All Versions V1.021GREEN POWERLINK Manual All Versions V1.022!

Navigation menu