Shin Oh Electronics SP-1001 Wireless LAN Card User Manual users manual

Shin-Oh Electronics Co., Ltd. Wireless LAN Card users manual

users manual

USER’S GUIDE11Mbps Wireless LAN Card –LANCASTER (SP-1001)( Model No : SP-1001)SHIN-OH ELECTRONICS CO., LTD. IN KOREA
WIRELESS LAN CARD (PCMCIA TYPE)WIRELESS LAN CARD (USB TYPE)SETUP UTILITY(CD)USER’S GUIDEUSB CABLERF CABLE: MAKE AN OFFER FORM SHIN-OH ELECTRONICS CO., LTD. IN KOREA"FCC RF exposure compliance requirements: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter”
Table of contents1. DRIVER Installation1-1. Software Contents1-2. DRIVER INSTALL2. HARDWARE SETUP2-1. Hardware Installation for Wireless LAN Card3. SOFTWARE SETUP3-1. Software Installation for Wireless LAN Card4. WIRELESS UTILITY SETUP4-1. SSID Setup4-2. Network Type Setup4-3. Use WEP (Wired Equivalent Privacy)4-4. ink Quality Test5. CERTIFICATE OF WARRANTYTable of contentsSHIN-OH ELECTRONICS CO., LTD. IN KOREA111333377789LANCASTER(SP-1001) Wireless LAN PC card is fully Compatible with ieee 802.11b Standard and Supports a high Data rate up to 11Mbps. “LANCASTER(SP-1001) Wireless LAN PC Card”willoperate in 2.4 GHz Direct Sequence Spread Spectrum (DSSS) for wireless networks in the home or office environment. Ypu can use internet within wireless Network at anytime in anyplace.In addition, the EnGenius Wireless LAN PC Card uses a 64/128-bit WEP Encryption for a secure network connection. The LANCASTER (SP-1001) Wireless LAN PC Card is compatible with Windows 98, ME, 2000, and XP.Features and BenefitsThis󰚟device󰚟complies󰚟with󰚟Part󰚟15󰚟of󰚟the󰚟FCC󰚟Rules. Operation󰚟is󰚟subject󰚟to󰚟the󰚟following󰚟two󰚟conditions: (1)󰚟this󰚟device󰚟may󰚟not󰚟cause󰚟harmful󰚟interference,󰚟and󰚟(2)󰚟this󰚟device󰚟must󰚟accept󰚟any󰚟interference󰚟received,󰚟including󰚟interference󰚟that󰚟may󰚟cause󰚟undesired󰚟operation.Caution:󰚟changes󰚟or󰚟modifications󰚟not󰚟expressly󰚟approved󰚟by󰚟the󰚟party󰚟responsible󰚟for󰚟compliance󰚟could󰚟void󰚟the󰚟user's󰚟authority󰚟to󰚟operate󰚟the󰚟equipment.WARNING
1. DRIVER Installation1-1. Software ContentsInstall CD : This mainboard will be shipped with a Support CD which contains thosenecessary driver files, Application Softwares and some helpful utilities.It is a user-friendly, auto-run CD which will open itself up in a CD-ROMautomatically.Contents of Install CD : For this Wireless Lan card, user will be able to find in the Install CD the followingDrivers and utilities : 1. LANCASTER DIRVER ( Wireless lan card driver )2. LANCASTER Wireless Settings (Setting and Monitor Utility)3. USER’S GUIDE-1 -1-2. DRIVER INSTALL1. Open up the Install CD : Please put the Support CD enclosed in your Wireless lan card packageinto the CD-ROM drive. In a few seconds, the Main Menu will automatically appear, displaying the contents to be installed for this driver:2. In case your system does not open the Support CD automatically,please click to the following path to enter the Main Installation Menu:D:\ DRIVER>LANCASTER.exe (assuming that your CD-ROM Drive is Drive D)3. InstallShield Wizard will pop up to guide you to the Wireless Landriver installation. Click “Next”button to continue.
1. DRIVER Installation4. Installing5. Installshield wizard complete The InstallShield Wizard has successfully installedClick Finish to exit the wizard-2 -
2. HARDWARE SETUP2-1. Hardware Installation for Wireless LAN CardTo install the Wireless LAN card, please do the following:1. Find an available Type II or Type III PCMCIA slot in your notebook computer.2. With the PCMCIA adapter’s 68-pin connector facing the PCMCIA slot and its label facing up,slide the PCMCIA adapter completely into the PCMCIA slot.3. SOFTWARE SETUP3-1. Software Installation for Wireless LAN Card1. Insert the 11Mbps Wireless PC Card into a standard type II PCMCIA slot in your notebook.2. Windows 95/98/ME/2000/XP will automatically detect the new hardware and prompt you to install the driver needed. -3 -
3. SOFTWARE SETUP3. Select “Display a list of the known drivers for this device so that I can choose A specific driver”and click Next.4. Select “Network adapters”and click Next.-4 -
3. SOFTWARE SETUP4. First : Select “SHIN-OH ELECTRONICS CO., LTD.”in Manufacturerssecond : Select “SHIN-OH LANCASTER Wireless LAN PC Card”IF YOU MUST BE SELECT : click “Next”5. Update Driver Warning : click “Yes”.-5 -6. Start Device Driver Installation : click “Next”
3. SOFTWARE SETUP6. Digital Signature Not Found : click “Yes”-6 -7. Click Finish to complete the software installation.8. Restart the computer.
4. WIRELESS UTILITY SETUP4-1. SSID SetupThe SSID is a unique ID given to the Access Point. Wireless clients associating to any AccessPoint must have the same SSID. Select Configuration as and enter a Network Name (AccessPoint) you desire to connect with.4-2. Network Type SetupInfrastructure mode : selete Access PointAd-Hoc mode : selete Pear to Pear-7 -
4. WIRELESS UTILITY SETUP-8 -4-3. Use WEP (Wired Equivalent Privacy)To prevent unauthorized wireless stations from accessing data transmitted over the network, the11Mbps Wireless LAN PC Card offers highly secure data encryption, known as WEP. If yourequire high security in transmission, please select the Enable item and click the Key List button.The Wireless LAN PC Card supports two types of Encryption Key length: 64-Bits and 128-Bits. You may identify up to 4 different encryption keys and select one of them to encrypt your tRansmission data. The key value of your choice may either be:For 64-Bits encryption:Five alphanumeric characters in the range of “a-z”, “A-Z”and “0-9”(e.g. MyKey), or:10 digit hexadecimal values in the range of “A-F”and “0-9”, preceded by the characters “0x”values (e.g. 0x11AA22BB33).For 128-Bits encryption:13 alphanumeric characters in the range of “a-z”, “A-Z”and “0-9”(e.g. WEPencryption).26 digit hexadecimal values in the range of “A-F”and “0-9”, preceded by the characters “0x”values (e.g. 0x11AA22BB33123456789ABCDEFF)
4. WIRELESS UTILITY SETUP-9 -4-4. ink Quality TestLink Quality Test is a useful diagnostic tool for you to test point-to-point data transmission qualitybetween two wireless LAN stations. Or, if you use the Infrastructure wireless LAN configuration,you can test the transmission quality between your wireless LAN station and Access Point. When Link Quality Test Screen is displayed, you may choose one of the roles that this wirelessLAN station should perform.
CERTIFICATE OF WARRANTYThank you for purchasing our products.This product is released to the market after strict quality control and precise inspection. You may get the free serviceat our A/S center if the products you purchased are found to have any manufacturing defects or any natural defect. Period of Warranty Lancaster : A yearModel No : SP-1001Purchased Date : Serial No. :Purchased Shop : Price :Free ServiceYou may get the free service only for the defects within one year after purchasing.Service with ChargedFor the asked service for none defectsOnce you ask for service, if your product is proved as none defect, you will be charged for the provided service so, please carefully read user's guide.For the defects caused by customer's error-Defects caused by carelessness in using (getting wet and impact) or unauthorized repair and modification.- Defects caused by plugging to the none appropriate power source.-Defects caused by any repair at the unauthorized place other than the Shinoh Electronic Co., LtdA/S center.- Defects or damage caused by the drop in moving - Defects caused by disasters such as fire, flood and earth quakeA/S Center: 729-5 Bonoh-dong, Ansan-city, Kyeonggi-provincePhone No. 031-406-3702Fax No. 031-407-7548Homepage : http://www.shinoh.co.kr* This guarantee shall not be reissued so, please carefully keep it with user's guide. 5. CERTIFICATE OF WARRANTY

Navigation menu