Teldat CM11B-01 WLAN transmitter module User Manual ar ib CPEmb 05a e

Teldat GmbH WLAN transmitter module ar ib CPEmb 05a e

Users Manual

ar_ib_CPEmb_05_eInformation Brief - Artem ComPoint EmbeddedInformation BriefBrief: Artem ComPoint EmbeddedPublishing Date: Nov. 11, 2004FunkwerkEnterprise Comms. GmbHSüdwestpark. 94D-90449 Nürnberg, GermanyPhone: +49-180-300 91 91-0Fax: +49-180-300 91 93-0info@funkwerk-ec.comwww.funkwerk-ec.com
Information Brief - artem Core ModuleContent....................................................................................................................................................................................................................................................2General Description ...............................................................................................................................................................................................................................3Usable CPU Ports ...................................................................................................................................................................................................................................3Core Module Technical GraphicsBlock Diagramm..............................................................................................................................................................................................................................4MiniPCI-Header For Core ..............................................................................................................................................................................................................5Software Features....................................................................................................................................................................................................................................6Legal Notices ...........................................................................................................................................................................................................................................7Contact ....................................................................................................................................................................................................................................................8Content2Wireless LAN and your healthThe Artem Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emittedby Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobi-le phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommenda-tions, Artem believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of thescientific community and result from deliberations of panels and committees of scientists who continually review and interpret theextensive research literature.Regulatory informationThis device must be installed and used in strict accordance with the manufacturer's instructions as described in the user documenta-tion that comes with the product. For country-specific radio and telecommunications approvals, please consult page 2 of this flyer.Insome situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible repre-sentatives of the organization. These situations may for example include: Using the wireless equipment on board of airplanes, or inany other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you areuncertain of the policy that applies on the use of wireless equipment in a specific organization or environment (e.g. airports), you areencouraged to ask for authorization to use this device prior to turning on the equipment. The manufacturer is not responsible forany radio or television interference caused by unauthorized modification of the devices included with this kit, or the substitution orattachment of connecting cables and equipment other than specified by manufacturer. The correction of interference caused by suchunauthorized modification, substitution or attachment will be the responsibility of the user. The manufacturer and its authorizedresellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to complywith these guidelines.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operatethe equipment.When integrating the Module, the following information must be considered:All products containing the module must be labelled. The label must be affixed on an exterior surface of the end product suchthat it will be visible upon inspection in compliance with the modular approval guidelines developed by the FCC.The label must state "This device contains FCC ID R8G-CM11B-01"In addition, the user manual for the end product must contain the following information:"This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may notcause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesiredoperation."
Information Brief - artem Core ModuleGeneral Description3The Core Module combines all needed components to build an IEEE 802.11b wireless device.It contains:• Network processor (Ubicom IP2022 @ 120MHz)• IEEE 802.11b radio (Agere Hermes 2 and Penguin)• Clock (4.8MHz crystal, CPU internal PLL to generate 120MHz and 240MHz)• Optional: 32kHz crystal for RTC and sleep mode• Voltage supervisor including debounced reset input• 1 MBit SRAM and 4 MBit Serial Flash for packet buffering and firmware storage• 2.5V LDO• 2 U.FL antenna connectors (Rx/Tx and Rx diversity)The module is designed in the form factor of a MiniPCI Type IIIA card (50.95 x 59.75 x 8 mm (L x W x H)) , however with a pro-prietary pinout. Please see the MiniPCI standard for mechanical details (MiniPCI Spec Rev. 1.0, Figure 5-7 on page 45).Power consumption: max. 500mA @ 3.3V (avg.: tbd ; sleep: tbd)Supply voltage: 3.3V +/- 3%Operating temperature: -20 °C .. +70°CUsable CPU PortsPort Vmax Imax Assignment Preferred usageRA1 3.3V 24mA DI / DO SPI SCK (fixed) SPI SCKRA2 3.3V 24mA DI / DO SPI SI (fixed) SPI SIRA3 3.3V 24mA DI / DO SPI SO (fixed) SPI SORB0 3.3V 8mA DI / DO / Ext. Interrupt SPI CSRB1 3.3V 8mA DI / DO / Ext. InterruptRE4 3.3V 8mA DI / DO SERDES 1 Ethernet 1RE5 3.3V 24mA DI / DO SERDES 1 Ethernet 1RE6 3.3V 24mA DI / DO SERDES 1 Ethernet 1RE7 3.3V 8mA DI / DO SERDES 1 Ethernet 1RG4 2.5V 4mA AI / DO SERDES 1 Ethernet 1RG5 2.5V 4mA AI / DO SERDES 1 Ethernet 1RF0 3.3V 8mA DI / DO SERDES 2 Ethernet 2 / RS232 RTSRF1 3.3V 24mA DI / DO SERDES 2 Ethernet 2 / RS232 TxDRF2 3.3V 24mA DI / DO SERDES 2 Ethernet 2 / RS232 CTSRF3 3.3V 8mA DI / DO SERDES 2 Ethernet 2RG6 2.5V 4mA AI / DO SERDES 2 Ethernet 2RG7 2.5V 4mA AI / DO SERDES 2 Ethernet 2RG0 2.5V 4mA AI / DO / ACOMP Out Act. LED 2RG1 2.5V 4mA AI / DO / ACOMP In - Link LED 2RG2 2.5V 4mA AI / DO / ACOMP In + Act. LED 1 & Monitor buttonRG3 2.5V 4mA AI / DO / ADC Ref In Link LED 1RF7 3.3V 8mA DI / DO SERDES 2 RS232 RxDAI = Analog Input (ADC, 48kHz, 10bit)DI = Digital InputDO = Digital OutputExt. Interput = Interupt InputACOMP = Analog Comparator
Access Point Ethernet Client Ethernet Serial ClientCurrent firmware & version sm_ap V1.40 sm_ac V1.40 sm_sc V1.40WirelessNetwork Name yes yes yesChannel Setting yes yes (Ad-Hoc) yes (Ad-Hoc)802.11d Support yes yes yesTransmission Rate (auto + fixed) yes yes yesAd-Hoc Mode n/a yes yesLoad Balancing yes yes yesAP Distance yes n/a n/aRTS Threshold (1 - 2347) yes yes yesMicrowave robustness yes yes yesMedium Distribution Support yes yes yesDTIM Interval (1 - 65535) yes n/a n/aMulticast rate yes yes yesPS Multicast Buffering yes n/a n/aIAPP (ARtem proprietary) yes n/a n/aWLAN Node Table yes n/a n/aAP Scan List n/a yes yesLAN Node Table n/a yes yesSecurity802.1x Authentication MD5, TLS, TTLS, MD5 MD5PEAP802.1x Reauthentication Timer yes n/a n/aRADIUS Client yes n/a n/aACL Local yes n/a n/aData Encryption WEP64/128/Plus WEP64/128/Plus WEP64/128/PlusTKIP TKIPDeny Unencrypted Data yes n/a n/aWPA-Personal (PSK) Planned yes yesWPA-Enterprise (802.1x) Planned Planned PlannedRadio On/Off yes yes yesAP Visibility (Hide SSID) yes n/a n/aInter Traffic Blocking (Repeating) yes n/a n/aAdmin Password yes yes yesConfiguration over WLAN Option yes yes yesConfiguration & ManagementUser-Friendly Web Interface yes yes yesComPoint Manager - Discovery- & Rollout-Tool yes yes yesConfiguration Management API yes yes yesDHCP Client yes yes yesReboot yes yes yesReset Configuration yes yes yesReset All to Factory Default yes yes yesInformation Brief - artem Core Module4Software Features
Information Brief - artem Core Module 5Software FeaturesAccess Point Ethernet Client Ethernet Serial ClientSerialTCP Server n/a n/a yesTCP Client n/a n/a yesTransparent Serial Bridge n/a n/a PlannedVirtual COM n/a n/a PlannedSerial Statistics n/a n/a yesBaudrate n/a n/a 2400 - 230400Data Bits (7/8) n/a n/a yesParity (None, Even, Odd) n/a n/a yesStop Bits (1, 2) n/a n/a yesHandshake HW (RTS/CTS, DTR/DSR) n/a n/a yes (only for RS232)Handshake SW (XON/XOFF) n/a n/a PlannedFrame Send Trigger via Time-Out n/a n/a yesFrame Send Trigger via Byte Count n/a n/a yesFrame Send Trigger via Multi-Byte Delimiter n/a n/a Planned
ContactAAddddrreessssFunkwerk Enterprise Communications GmbHSüdwestpark 94D-90449 Nürnberg, GermanyGGeenneerraallPhone: +49-180-300 91 91-0Fax: +49-180-300 91 93-0eMail: info@funkwerk-ec.com Legal NoticesAll product names are trade marks of the Funkwer Enterprise Communications GmbH or of the respective owner and will be accep-ted hereby. All statements are valid at the time of publishing and can be changed without any announcements.©2004 Funkwer Enterprise Communications GmbH. All rights reserved. Duplications, changes or translations are not allowed withoutpermission of the Funkwer Enterprise Communications GmbH.Information Brief - artem Core Module6

Navigation menu