Terraboost Media LCDFSAMC04-WF LED Hand Sanitizing Billboard User Manual Advertising Play

Terraboost Media LLC LED Hand Sanitizing Billboard Advertising Play

Manual

Contents18.5 AdverƟsing Player User Manual ______________________________________________ 1Safety InformaƟon__________________________________________________________________1Before Start _______________________________________________________________________2Start with SD Card __________________________________________________________________2Remote Control ____________________________________________________________________3Install DMB and start Server __________________________________________________________3Install DMB _______________________________________________________________________________ 3Start Server _______________________________________________________________________________ 3Add a Terminal ____________________________________________________________________________ 4Connect to Server __________________________________________________________________5Play pictures and videos _____________________________________________________________6Log in the system __________________________________________________________________________ 6Upload pictures and videos to server __________________________________________________________ 6Task Programming _________________________________________________________________________ 7Other FuncƟons ____________________________________________________________________8Firmware update __________________________________________________________________________ 8Language Seƫng __________________________________________________________________________ 8Terminal Brightness ________________________________________________________________________ 9Trouble List________________________________________________________________________9LCD does not show online while checking from Browser? __________________________________________ 9No display or dark screen____________________________________________________________________ 9No sound_________________________________________________________________________________ 9LCD does not download Įles from the server while the status is online _______________________________ 9InstallaƟon Guide _________________________________________________________________10
118.5 Advertising Player User ManualSafety Information1. The maximum ambient temperature should not exceed 40ഒ.2. The LED Hand Sanitizing Billboard shall only used for I.T. Equipment.3. The main plug is used as disconnect device, the socket-outlet shall be installed near the equipment and shallbe easily accessible.4. Correct Disposal of this product. This marking indicates that this product should not be disposedwith other household wastes throughout the EU. To prevent possible harm to the environment or human healthfrom uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.To return your used device, please use the return and collection systems or contact the retailer where theproduct was purchased. They can take this product for environmental safe recycling.5. This product must not be disposed together with the domestic waste. This product has to be disposed at anauthorized place for recycling of electrical and electronic appliances.6.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications.
2However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.Consult the dealer or an experienced radio/TV technician for help.Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.Before StartBefore using, make sure that the components are enough (Player, SD Card ,Adapter , Remote Control ).Note : SD Card has installed the player running programs, please do not format it ,do not do anything to SDCard .Start with SD CardStart to run the play from SD card ,we need following steps :Insert SD card into the SD Card slot , then power on , waiting about 1 minute ,you can see the desktop asbelow Chart-1:Chart-1In order to comply with FCC's RF radiation exposure limits for general population/uncontrolled exposure, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.
3Remote ControlPress *#9879# , and input password 123456 you can enter Terminal ConfigHere you need to config the terminal Server , config the terminal Network (including IP, WIFI if necessary).Terminal Server : input the Server IP number , Download Port 60001, Control Port 60001 , SerialNumber ,see Chart-2:Chart-2Note : Download port and control port are all 60001, they can not be changed. Remember the Serial numberTerminal NetworkEthernet Config: set reasonable IP , gateway , Subnet , DNS etc.If you want to use WIFI , see below :WIFI Config : WIFI is on , Mode is DHCP , ESSID is your Router name , password is your Router accesspassword , Encro Type is as same as your Router.When you config all OK , then reboot terminal ..it takes about 1 minute.Install DMB and start ServerInstall DMBIn order to control the terminal , we need to install DMB BS3 Software , the installation details please seespecification.Start ServerServer Software can install easily and fast , no special setting ,just next.After your installation ,please open IE browse , input http:// Sever IP address˖8080/dmb . the login name andpassword are all root. as below: chart-3:
4Chart-3First , enter into the Media Box Management :see chart-4:Chart-4Add a TerminalPlease according to Advertising machine the actual board type and resolution, select the terminal type and output mode, output mode, the wrong choice may lead to the LCD screen can not display properly or restart . as chart-5:
5Chart-5Connect to ServerPlease make sure the configuration you set in Terminal is right.Build communication between terminal and computer with your wifi network.We control the Teminal through your Router.You need to set network between your computer and your Router. See Chart 6: Chart-6
6Play pictures and videosLog in the systemAfter completing installation of Server, user can open a browser and inputhttp://<Server IP>:8080/dmb in address bar to open login page as shown in chart-3Upload pictures and videos to server1ǃMedia Managementadd media files, upload media files to Server, you can add video, picture, text file , and music etc. Please choose Media Management , select option the details Select uploaded videos from local , select group, then “upload”. as below chart-7:Chart-7when uploading is finished , pleas wait the Server to convert videos files to the specified content , then click “approval” . if the files are not audited and passed , the files can not be used. See chart-8:
7Chart-8Task Programming1ǃChoose StyleClick “Task Programming” , then select Styles ( your choose must be right with the terminal you want to add in) ,then “confirm”. Users can enter the style management page by clicking , No default style is available when logging the system. Users have to click “import”.(sigma8653 facilities should have corresponding styles respectively, or troubles will be caused) See chart-9:Chart-9
8Add MediasDrag videos from the left media library to the main zone or playing zone , etc. when programming is finished , save and audit .choose “Save & Audit”. see as below chart-10:Chart-10Other FunctionsFirmware update1 Terminal release U disk in the directory Upgrade Kit copied to the root directory of U, such as Chart-11˖Chart-11Make sure SD card is format as FAT32 . insert SD card into SD slot . insert U disk.. then turn on power ,wait about 1 minute and the indicator becomes from red to off . then unplug U disk ,turn off power , and turn on power again . about 1 minute , it is OK Language SettingYou can set terminal language : English or Simple Chinese using Remote Control .
9Also ,you can set DMB Server sofrware language as English or Simple Chinese …Note : when you change your computer IP , you have to reconfig the DMB and restart Server .Terminal BrightnessYou can set terminal brightness and so on . see details in terminal config .Trouble ListPlease use the following list to do some trouble for the product if necessary.LCD does not show online while checking from Browser?Check if LCD connected to the WIFI router by the following steps:1 login the terminal IP in IE browser 2 select “Network status” and click to see the details . If the WIFI connection is successful , you can see there an IP address shown there . If not , re-scan the WIFI networking and make sure the password / ESSID/Encro Type are all right .3 verify the connection by checking if a computer connected to the same WIFI router can access the internet.4 Check the Server address setting is correct.5 Check if there any Firewall in front of Router.No display or dark screen1 Check power adaptor if it is working ok2 Check the connection of power adaptorNo sound1 Check if the setting is mute or sound level 0 2 Check if the video clip has sound trackLCD does not download files from the server while the status is online1 Check if the LCD is assigned to a group and also the group has a valid playlist . if playlist and group setting are correct ,try to restart the terminal .2 Check the network status is ok
1040” 18.5”© 2012 TERRABOOST MEDIA LLCdigital signageflexBY TERRABOOST MEDIAwww.flexsignage.com:8080©®BrushedAluminumOptional DispenserITEM PARAMETERS SUPPORTED FILE FORMATSCoupon12 Ad Slots x 10 Sec. Each. Screen Capable of Dividingand Inserting ContentAutomaticInfraredDispenserSupported VideoSupported PhotoSupported AudioMPEG-1, MPEG-2 MP@HL, MPEG-4.2 ASP@L5, MPEG-4.10 (H.264) AP@L3, MP@L4.0 and HP@L4.0, WMV9 MP@HL, SMPTE421M (VC-1) MP@HL and AP@L3BMP, JPG, JPEG, PNG, GIFDolby Digital 5.1, Dolby Digital Plus 7.1, Dolby TrueHD 7.1, DTS 5.1 DTS-HD 7.1, MPEG-1Layers I, II and III (MP3) 2.0, MPEG-4 AAC-LC 5.1, M E PG-4 HE-AAC 5.1MPEG-4 BSAC 2.0,WMA9 2.0, WMA9 Pro 5.1, DVD-Audio with MLP option, Apple iTunes2.0 (no DRM),ATRAC3 2.0, 24-bit linear PCM 7.1 LED ScreenResolutionBrightnessContrast RatioPower SupplyPower ConsumptionMemory CardFile System18.5 inch (diagonal) Digital LED Panel 3:41366x768 (RGB)250nits1000:1Adapter, Input: AC100-240V; Output: 12V/3A 30W (max)SD card 4GEmbedded Linux OS2.4L POWER BOOST VERSION (LED DISPLAY) DETAREPO G3 ro IFIW
11DIGITAL LED DISPENSER ASSEMBLY INSTRUCTIONSThe enclosed pre-numbered list of hardware parts along withstep-by-step directions will enable you to successfully assemble the unitdigital signageflexBY TERRABOOST MEDIAwww.flexsignage.com:8080©®FOR MORE INFORMATION, PLEASE CONTACT US AT: advertising@terraboost.com877-837-7210 | www.terraboost.com123456789101112111211142256911Pole (optional)Bolts with allen Head for Base18.5” LED Screen PanelSmall Screw to Lock DispenserBase (optional)Wall Mount Kit12 4Head Shoulder Screws for LEDPole Mount Kit13 1AC Adapter 1734Insert the two bolts with the Allen head (item #6) into the two holes on the bottom of the base (item #4) and screwinto the pole (item #3) with the Allen Wrench provided astight as possible.1Lift up front cover of the dispenser to match the two holesin the back of the plastic housing with the two holes in the pole. Screw either the two black plastic knobs(Item #2) or the two bolts, washers, and nuts from thepole mount kit (Item #11) into place to secure the dispenser housing to the pole. Hand tighten black knobsor use two 7/16” socket or combination wrenches not included for bolt/nut method. 2Locate the battery compartment on the right side of themodule and slide it open to insert the 4 AA Alkaline batteriesin the proper orientation (batteries provided). Click the “ on/off” switch to “ on” . A red blinking light may be an indication of an improper installation. Take the module (as pictured) and press it against the inside of the dispenserhousing and slide down until it clicks into place.3BASE & POLE ASSEMBLEDBase & Pole Installation(Items #3,4,6)Mounting the Plastic DisplayHousing to the Pole & Base (Item #1)TIGHTEN KNOBS WITH HANDS OR BOLT/ NUT WITH 2 WRENCHESInstall Batteries & AutomaticDispenser STEP Module(Item #5)MECHANISM IN PLACEInstructions to Mount LED Screen Power Boost Dispenser to Base & Pole Set2© 2012 TERRABOOST MEDIA LLC28101312
12DIGITAL LED DISPENSER ASSEMBLY INSTRUCTIONSThe enclosed pre-numbered list of hardware parts along withstep-by-step directions will enable you to successfully assemble the unitdigital signageflexBY TERRABOOST MEDIAwww.flexsignage.com:8080©®FOR MORE INFORMATION, PLEASE CONTACT US AT: advertising@terraboost.com877-837-7210 | www.terraboost.comThe AC adapter/power cord (item #13) should bethreaded through the unit when you open up the package. Take the AC adapter and plug one end into the wall and the other end into the LED screen (item #7) as pictured above. Please note AC Adaptor power brick will rest in provided cubby. 7Plug LED Screen InPosition the four (4) black head shoulder screws (Item #12) that are now screwed into the back of the LED screen (item#7) into the grooves on the back of the display housing (item #1) and slide into place. 8Install LED Screen to Dispenser HousingTake the four (4) small screws to lock the dispenser (item #8) and place into the four holes located in the middle and bottom of the display housing on both the right and left sides (item #1).Please note to lock dispenser only after initial LED screen setup including connecting to WiFi or 3G network.9Lock The DisplayTake four (4) black head shoulder screws (Item #12) and hand tighten into the four holes on the back of the LED screen (Item #7).6Prepare LED Screen for MountingRemove the pin stopper mechanism from thedispenser module and insert the bottle with thenozzle facing downward.Replace the pin stopper mechanism to secure the bottle in place as pictured.4Install 2.4L Tazza® Sanitizer Bottle(Item #9)5Completed Dispenser &Bottle InstallationBOTTLE CORRECTLY IN CHAMBERCORRECT AC ADAPTER INSTALLATIONDISPENSER & BOTTLE CORRECT IN PLACESLIDE DOWN TO LOCK INTO PLACE USE ALL FOUR LOCKSDO NOT OVER TIGHTEN3© 2012 TERRABOOST MEDIA LLC
13DIGITAL LED DISPENSER ASSEMBLY INSTRUCTIONSThe enclosed pre-numbered list of hardware parts along withstep-by-step directions will enable you to successfully assemble the unitInstructions to Mount LED Screen Power Boost Dispenser to the Walldigital signageflexBY TERRABOOST MEDIAwww.flexsignage.com:8080©®FOR MORE INFORMATION, PLEASE CONTACT US AT: advertising@terraboost.com877-837-7210 | www.terraboost.comLocate the battery compartment on the right side of themodule and slide it open to insert the 4 AA Alkaline batteriesin the proper orientation (batteries provided). Click the “ on/off” switch to “ on” . A red blinking light may be an indication of an improper installation. Take the module (as pictured) and press it against the inside of the dispenserhousing and slide down until it clicks into place.3Install Batteries & AutomaticDispenser STEP Module(Item #5)MECHANISM IN PLACEMaking sure the display housing is level, drill a 1/4” pilothole into the wall in 6 locations through the provided holesin the plastic display housing (four holes recommended at the top with two holes in the middle of the bottom section). Based on the surface you are mounting to, use anchors and the supplied screws and washers from the wall mount kit tosecure the display housing to the wall (item #10) using a #2 Philips bit for electrical drill or #2 Philips screwdriver (not included). Position the bottom of the display housing (item #1)approximately 38” from the ground.12Mounting the Plastic Display Housing to the WallPosition Dispenser on WallPROPER HEIGHT LEVEL ENSURE DISPENSER IS LEVELTake four (4) black head shoulder screws (Item #12) and hand tighten into the four holes on the back of the LED screen (Item #7).6Prepare LED Screen for MountingRemove the pin stopper mechanism from the dispenser module and insert the bottle with the nozzle facing downward.Replace the pin stopper mechanism to secure the bottle in place as pictured.4Install 2.4L Tazza® Sanitizer Bottle(Item #9)5Completed Dispenser &Bottle InstallationBOTTLE CORRECTLY IN CHAMBER DISPENSER & BOTTLE CORRECT IN PLACE DO NOT OVER TIGHTEN4© 2012 TERRABOOST MEDIA LLC
DIGITAL LED DISPENSER ASSEMBLY INSTRUCTIONSThe enclosed pre-numbered list of hardware parts along withstep-by-step directions will enable you to successfully assemble the unitdigital signageflexBY TERRABOOST MEDIAwww.flexsignage.com:8080©®FOR MORE INFORMATION, PLEASE CONTACT US AT: advertising@terraboost.com877-837-7210 | www.terraboost.comThe AC adapter/power cord (item #13) should bethreaded through the unit when you open up the package. Take the AC adapter and plug one end into the wall and the other end into the LED screen (item #7) as pictured above. Please note AC Adaptor power brick will rest in provided cubby. 7Plug LED Screen InPosition the four (4) black head shoulder screws (Item #12) that are now screwed into the back of the LED screen (item#7) into the grooves on the back of the display housing (item #1) and slide into place. 8Install LED Screen to Dispenser HousingTake the four (4) small screws to lock the dispenser (item #8) and place into the four holes located in the middle and bottom of the display housing on both the right and left sides (item #1).Please note to lock dispenser only after initial LED screen setup including connecting to WiFi or 3G network.9Lock The DisplayCORRECT AC ADAPTER INSTALLATION SLIDE DOWN TO LOCK INTO PLACE USE ALL FOUR LOCKS LED Dispenser Properly Mounted on the Wall LED Dispenser Properly Mounted on the Pole5© 2012 TERRABOOST MEDIA LLC14

Navigation menu