ZTE ZXV10W300V8 ZXV10 W300 V8, a wireless ADSL Router User Manual users manual

ZTE Corporation ZXV10 W300 V8, a wireless ADSL Router users manual

users manual

LEGAL INFORMATION Copyright © 2009 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein. ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein. The contents of this document and all policies of ZTE CORPORATION, including without limitation policies related to support or training are subject to change without notice. Revision History Date Revision No. Serial No. Description 2009-05-11 R1.1 sjzl20085610 Revision: add functions in Chapter 42008-11-18 R1.0 sjzl20085610 First edition for version 8.0
Contents Safety Instructions ................................................................. i During Installation and Application.......................................................i For Service.......................................................................................ii Chapter 1................................................................................1 Introduction...........................................................................1 Overview......................................................................................... 1 Packing List..................................................................................... 1 Indicators........................................................................................ 2 Ports and Keys................................................................................. 3 System Requirements...................................................................... 4 Chapter 2................................................................................5 Product Installation...............................................................5 Hardware Connections...................................................................... 5 Default Settings............................................................................... 6 Computer Configuration ................................................................... 7 Checking Computer Configuration.................................................................. 7 Configuring TCP/IP........................................................................................ 7 Chapter 3................................................................................9 Configuration Preparation.....................................................9 Logging into Web Configuration Page................................................. 9 Viewing Device Status...................................................................... 9
ZXV10 W300 Wireless ADSL Router User Manual Chapter 4 ............................................................................. 10 Network Configuration........................................................ 10 Creating WAN Connection................................................................10 Wireless Configuration.....................................................................14 Configuring WLAN Basic Parameters ............................................................14 Configuring WLAN Security Parameters........................................................15 Configuring Multiple SSIDs...........................................................................18 Checking Associated Device.........................................................................19 Configuring Access Control List.....................................................................19 Chapter 5 ............................................................................. 20 Application Configuration.................................................... 20 Configuring UPnP............................................................................20 Configuring DMZ Host .....................................................................20 Chapter 6 ............................................................................. 21 Troubleshooting .................................................................. 21 Appendix A........................................................................... 22 WLAN Configuration............................................................ 22
Safety Instructions During Installation and Application  Use the power adapter included in this package. Other power adapters may make the device unable to work normally or even damage the device.  Pay attention to the load of the power socket and power cable. The overloading power socket or broken power cable may cause electric shock or fire. It is recommended to check the cables periodically and replace the broken one immediately.  Appropriate space for heat dissipation is required to prevent the product from overheating.  Keep the product away from heat sources. Avoid the product working in high-temperature or direct sunshine environment.  Keep the product away from moisture or vapor. Do not splash any fluid on the product.  Do not place the product on any unstable surface.  Power off and unplug this product carefully when it is not in use or before cleaning. Pay attention to the high temperature on the power adapter’s surface.  Wait for at least 15 seconds between powering off and re-powering on of the device.  Do not block the heat dissipation opening of the product.  If the product is not used for a long period of time, unplug the power cord.
ZXV10 W300 Wireless ADSL Router User Manual For Service Do not attempt to disassemble, repair, or open this product, which will lose the warranty services. Contact qualified service personnel in case of problems, especially under the following conditions:  The power socket or cable is damaged.  Liquid is splashed into the product.  The product is exposed to rain or water.  The product does not work normally when the operating instructions are followed.  The product is dropped or struck, causing the product damaged. Caution: Please make no modification to the device.
Confidential and Proprietary Information of ZTE CORPORATION 1 Chapter 1 Introduction Overview W300 is a home and SOHO oriented wireless broadband router integrating ADSL, AP and LAN Switch. It provides triple-play services such as Internet data, voice access, and video access. W300 provides priority access for different services with sophisticated ATM-based and IP-based QoS to meet different requirements for high-speed Internet access, IPTV Video on Demand (VoD), live-broadcast access and voice access. Wireless encryption and built-in firewall prevent unauthorized users from accessing the network, ensuring the security of legal users accessing the wired and wireless networks. W300 supports TR-069 protocol for allowing overall remote network management. Note: ZTE CORPORATION reserves the right to modify technical specifications in this manual without any notification in advance. Packing List The package box for a W300 includes the following components, as shown in Table 1.
ZXV10 W300 Wireless ADSL Router User Manual 2 Confidential and Proprietary Information of ZTE CORPORATION TABLE 1 PACKING LIST Component Quantity ZXV10 W300 Wireless ADSL Router 1 External splitter 1 Power adapter 1 Telephone line 1 Straight-through Ethernet cable 1 Warranty card 1 ZXV10 W300 Wireless ADSL Router User Manual 1 Note: Components actually delivered depend on the service provider. If any component is missing or damaged, contact the service provider immediately. Please keep the packing box and components well in case of replacement. Indicators There are nine indicators on the front panel of W300, indicating the running status of the device, as shown in Figure 1. The meanings of these indicators are described in Table 2. FIGURE 1 INDICATORS ON THE FRONT PANEL TABLE 2 DESCRIPTIONS OF THE INDICATORS Indicator Color Description Power Green  Steady on: The power is connected and switched on. Off: The power has not been connected or it fails to function.
Chapter 1 - Introduction Confidential and Proprietary Information of ZTE CORPORATION 3 Indicator Color Description Internet Green  Steady on: the connection is established and the IP address is allocated. In multi-WAN connection mode, it indicates that the default routing WAN connection is established.  Flashing: Data is transmitting. The flashing frequency indicates the LAN traffic.  Off: The device is not powered on; ADSL link is not established; ADSL is operating in Bridge mode; IP or PPP link is abnormal. DSL Green  Steady on: ADSL link is established.  Flashing: ADSL link is establishing.  Off: ADSL link is not established. LAN1 LAN2 LAN3 LAN4 Green  Steady on: The LAN connection is established but no data transferring.  Flashing: Data is transmitting. The flashing frequency indicates the LAN traffic.  Off: The device is not powered on or the LAN connection has not been established. Wi-Fi Green  On: The wireless port is enabled.  Flashing: Data is transmitting. The flashing frequency indicates the WLAN traffic.  Off: The device is not powered on or the wireless port is disabled. WPS Green  On: The wireless terminal device is connected through WPS successfully. The indicator turns off five minutes later.  Slowly flashing: The wireless terminal device is connecting with W300 through WPS.  Quickly flashing: There is an error when the wireless terminal is connecting to W300 through WPS  Off: There is no wireless terminal device connected to W300 through WPS or the wireless terminal device has been connected to W300 through WPS for more than five minutes. Ports and Keys There are ten ports and buttons on the rear panel of W300, as shown in Figure 2. These ports and buttons are described in Table 3.
ZXV10 W300 Wireless ADSL Router User Manual 4 Confidential and Proprietary Information of ZTE CORPORATION FIGURE 2 REAR PANEL TABLE 3 DESCRIPTIONS OF THE PORTS AND BUTTONS Identification Description POWER Connected to the companion power adapter. On/Off Power switch Wi-Fi WLAN switch Reset When W300 is in operating status, pressing this button for more than 5 seconds will restore the device default settings and then the device will reboot automatically. WPS To enable WPS function and establish a secure transmitting channel for the wireless terminal devices. LAN1~ LAN4 Connected to PC’s network interface card (NIC) or other network device via RJ-45 cable. DSL Connected to the ADSL line or splitter via RJ-11 telephone line. System Requirements System requirements for the W300 router are as follows:  The user has already subscribed the ADSL service. The service provider shall provide at least one legal IP address (allocated either statically or dynamically).  One or more PCs with 10/100M Ethernet Network Interface Card (NIC).  For wireless access, an external or built-in 802.11b/g wireless adapter is required.  To configure the system via the Web page based interface, you need a Web browser such as the Internet Explorer (version6.0 or above), Netscape (version7.2 or above).
Confidential and Proprietary Information of ZTE CORPORATION 5 Chapter 2 Product Installation Hardware Connections Follow the steps below to perform hardware connections. 1. Place the W300 router on the plane surface. Minimize obstacles and the distance between the W300 router and the wireless terminal. 2. Perform ADSL uplink connection A W300 router can access the ISP’s network in ADSL uplink mode, as shown in Figure 3. FIGURE 3 ADSL UPLINK CONNECTION
ZXV10 W300 Wireless ADSL Router User Manual 6 Confidential and Proprietary Information of ZTE CORPORATION If a telephone needs to be installed before the splitter, the user must connect a voice filter in the Line port of the splitter; then connect the telephone after the voice filter. The other port connections can be referred to Figure 3. A splitter consists of three ports: ¾ Line: The port connected to the ADSL subscriber line. ¾ Modem: The port connected to DSL port of W300. ¾ Phone: The port connected to a telephone. 3. Use an RJ-45 cable to connect the W300’s LAN1 port to a computer or another network device. 4. Connect the power adapter to the device and plug the power adapter to the AC power outlet. W300 will be on after pushing the power switch button. Caution: Please use the companion power adapter. The other power adaptor may make W300 unable to work normally or even damage it. Default Settings The factory default settings for a W300 router are listed as follows:  IP address: 192.168.1.1; subnet mask: 255.255.255.0.  Use the DHCP server by default (i.e., the IP address can be obtained from the W300 router automatically via DHCP).  Line coding: Auto negotiation (T1.413/G.DMT/G.LITE/ADSL2 /ADSL2+).  To log into the configuration page of W300, use the username and password marked on the label of W300 cover.  Default network name (SSID) for WLAN (Wi-Fi), wireless encryption mode, and encryption key are also marked on the label of the W300 cover.
Chapter 2 - Product Installation Confidential and Proprietary Information of ZTE CORPORATION 7 Note: If the W300 router fails to work due to error configuration or if the user forgets the login password, press the Reset button for more than 5 seconds to restore the settings to the default, then the system restarts automatically. Computer Configuration Checking Computer Configuration If the computer uses a proxy server to access the Internet, it is suggested to disable this proxy service before performing the configurations. It is recommended to close the VPN software and the firewalls running on the computer. For example, in Microsoft Internet Explorer, the user may check the proxy service configuration as follows: 1. In the browser menu bar, click Tools > Internet Options. 2. Click the Connections tab and then click the LAN Settings button. 3. Uncheck the Use a proxy server for your LAN box if it is checked. 4. Click the OK button. Configuring TCP/IP If the operating system of the computer is one of the following ones: Windows95, Windows98, WindowsME, Windows2000, and WindowsXP, there are two methods for configuring the computer (the first one is recommended). The following instruction uses WindowsXP as an example (the method under other operation systems are similar).  Method 1: PC obtains an address from W300 via DHCP. Perform the steps below:
ZXV10 W300 Wireless ADSL Router User Manual 8 Confidential and Proprietary Information of ZTE CORPORATION 1. In Windows taskbar, click Start > Control Panel. 2. Double-click the Network Connection icon. 3. Right-click Local Area Connection and choose Properties from the pop-up short-cut menu. 4. Select Internet Protocol (TCP/IP), and then click the Properties button. 5. In the Internet Protocol (TCP/IP) Properties dialog box, check Obtain an IP address automatically and check Obtain DNS server address automatically. 6. Click OK to confirm and save the settings.  Method 2: Configure a static address for PC. Perform the steps below: 1. In Windows taskbar, click Start > Control Panel. 2. Double-click the Network Connection icon. 3. Right-click Local Area Connection and choose Properties from the pop-up short-cut menu. 4. Select Internet Protocol (TCP/IP), and then click the Properties button. 5. In Internet Protocol (TCP/IP) Properties dialog box, check Use the following IP address to specify this computer's IP address. This IP address shall be in the same network segment as the LAN port address of the W300 router and shall be in the form 192.168.1.x (x is a decimal integer between 2~254, for example, 192.168.1.2). Subnet mask is set to 255.255.255.0. Default gateway is set to 192.168.1.1. 6. Check Use the following DNS server addresses. To set the IP address of the DNS server, contact local service provider or set it to 192.168.1.1. 7. Click OK to confirm and save the settings.
Confidential and Proprietary Information of ZTE CORPORATION 9 Chapter 3 Configuration Preparation Logging into Web Configuration Page Follow the procedure below to log into the Web configuration page. 1. Open a browser (e.g, IE) and type http://192.168.1.1 (i.e., default IP address of the W300’s LAN port) in the address bar. 2. Press the Enter key of the keyboard to display the login page. 3. Input the user name and password (marked on the label of W300 cover), and then click the Login button to open the main page for configuration. Viewing Device Status By default, the main page shows the W300 device status .  Click Status > Network Interface > WAN Connection to view the WAN information.  Click Status > Network Interface > ADSL to view the ADSL information.  Click Status > User Interface > WLAN to view the WLAN information.  Click Status > User Interface > Ethernet to view the Ethernet information.
Confidential and Proprietary Information of ZTE CORPORATION 10 Chapter 4 Network Configuration Creating WAN Connection Follow the steps below to create a WAN Connection. 1. Click Network > WAN Connection to open the WAN configuration page, as shown in Figure 4. FIGURE 4 THE WAN CONFIGURATION PAGE 2. From the Connection Name pull-down list box, choose Create WAN Connection to create a new WAN connection or choose an existing WAN connection, as shown in Figure 5.
Chapter 4 - Network Configuration Confidential and Proprietary Information of ZTE CORPORATION 11 FIGURE 5 CREATING A WAN CONNECTION – 1 3. Choose a connection type from the Type pull-down list box, as shown in Figure 6. FIGURE 6 CREATING A WAN CONNECTION – 2 4. Configure parameters according to the specified network type.  If PPPoE is selected, the WAN connection configuration page is shown as Figure 7. To create a PPPoE WAN connection, perform the following operations. i. Specify the New Connection Name. ii. Specify the VPI/VCI value (provided by ISP). iii. Input the Username and Password (provided by ISP). iv. Leave the other parameters as default. v. Click the Create button. FIGURE 7 CREATING A WAN CONNECTION – 3
ZXV10 W300 Wireless ADSL Router User Manual 12 Confidential and Proprietary Information of ZTE CORPORATION  If PPPoA is selected, the WAN connection configuration page is shown as Figure 7. To create a PPPoA WAN connection, perform the following operations. i. Specify the New Connection Name. ii. Specify the VPI/VCI value (provided by ISP). iii. Input the Username and Password (provided by ISP). iv. Leave the other parameters as default. v. Click the Create button. FIGURE 8 CREATING A WAN CONNECTION – 4  If Static selected, the WAN connection configuration page is shown as Figure 9. To create a static WAN connection, perform the following operations. i. Specify the New Connection Name. ii. Specify the VPI/VCI value (provided by ISP). iii. Input the static IP Address, Subnet Mask, Default Gateway and DNS server IP address. iv. Leave the other parameters as default. v. Click the Create button.
Chapter 4 - Network Configuration Confidential and Proprietary Information of ZTE CORPORATION 13 FIGURE 9 CREATING A WAN CONNECTION – 5  If DHCP selected, the WAN connection configuration page is shown as Figure 10. To create a DHCP WAN connection, perform the following operations. i. Specify the New Connection Name. ii. Specify the VPI/VCI value (provided by ISP). iii. Leave the other parameters as default. iv. Click the Create button. FIGURE 10 CREATING A WAN CONNECTION – 6
ZXV10 W300 Wireless ADSL Router User Manual 14 Confidential and Proprietary Information of ZTE CORPORATION  If Bridge Connection selected, the WAN connection configuration page is shown as Figure 11. To create a bridge mode WAN connection, perform the following operations. i. Specify the New Connection Name. ii. Specify the VPI/VCI value (provided by ISP). iii. Leave the other parameters as default. iv. Click the Create button. FIGURE 11 CREATING A WAN CONNECTION – 7 Wireless Configuration Configuring WLAN Basic Parameters Click Network > WLAN > Basic to open the basic parameter configuration page, as shown in Figure 12. Set the parameters according to the descriptions below.  Enable Wireless RF: Whether to enable wireless RF function.  Mode: There are three available modes. ¾ Mixed (802.11b+802.11g): Support 802.11b and 802.11g ¾ IEEE 802.11b only: Support 802.11b only ¾ IEEE 802.11g only: Support 802.11g only
Chapter 4 - Network Configuration Confidential and Proprietary Information of ZTE CORPORATION 15  Channel: To select the channel for communication between the W300 router and the wireless terminal devices. It is recommended to use channel 1, 6 and 11.  It is recommended to leave other parameters as default. If it is necessary to change the parameters, please consult the professionals.  Click the Submit button to complete the basic configuration. FIGURE 12 THE WLAN BASIC CONFIGURATION PAGE Configuring WLAN Security Parameters Follow the steps below to configure the WLAN security parameters. 1. Click Network > WLAN > Security to open the WLAN security parameter configuration page, as shown in Figure 13.
ZXV10 W300 Wireless ADSL Router User Manual 16 Confidential and Proprietary Information of ZTE CORPORATION FIGURE 13 THE WLAN SECURITY CONFIGURATION PAGE 2. Select an encryption type from the Authentication Type pull-down list box, as shown in Figure 14. The options listed in Figure 14 is described as follows: ¾ Open System: No encryption ¾ Shared Key: WEP encryption (recommended) ¾ WPA-PSK: WPA encryption ¾ WPA2-PSK: WPA encryption ¾ WPA-WPA2: WPA encryption FIGURE 14 SETTING WLAN SECURITY PARAMETERS – 1  To adopt the WEP encryption mode, select Shared Key from the Authentication Type pull-down list box or select Enable from the WEP Encryption pull-down list box and the WEP encryption parameters are displayed, as shown in Figure 15. ¾ WEP Encryption Level: To select the WEP key length, 64 bits or 128 bits. A 128-bit key has a higher security than a 64-bit key, although a 64-bit key is usually adopted. ¾ WEP Key Index: To determine which group of the encryption key to be adopted.
Chapter 4 - Network Configuration Confidential and Proprietary Information of ZTE CORPORATION 17 ¾ WEP Key1 ~ WEP Key4: To input the encryption key. For a 128-bit key, input 26 hexadecimal digits or 13 ASCII characters; for a 64-bit key, input 10 hexadecimal digits or 5 ASCII characters. Click Submit to complete the configuration of WEP encryption. FIGURE 15 SETTING WLAN SECURITY PARAMETERS – 2 Note: WEP (Wired Equivalent Privacy) encryption is a popular adopted WLAN security protocol to enhance the security and confidentiality of wireless communication. Currently, allmost all of the existing WLAN network adapters support WEP encryption.  To adopt the WPA encryption mode, select WPA-PSK, WPA2-PSK, or WPA- WPA2 from the Authentication Type pull-down list box. And the WPA encryption parameters are displayed, as shown in Figure 16. ¾ WPA Passphrase: To specify the WPA encryption key (8~63 characters) ¾ WPA Group Key Update Interval: To set the update interval of the WPA encryption key ¾ WPA Encryption Algorithm: To select the WPA encryption algorithm, TKIP or AES. Click Submit to complete the configuration of WPA encryption.
ZXV10 W300 Wireless ADSL Router User Manual 18 Confidential and Proprietary Information of ZTE CORPORATION FIGURE 16 SETTING WLAN SECURITY PARAMETERS – 3 Note: WPA encryption is Wi-Fi encryption (Wi-Fi Protected Access). Configuring Multiple SSIDs SSID is the name of a wireless access point to be distinguished from another. It is case sensitive and must not exceed 32 characters. Users can set multiple SSIDs for W300. Click Network > WLAN > Multi-SSID Settings to open the SSID configuration page, as shown in Figure 17. FIGURE 17 SETTING MULTIPLE SSIDS ¾ Choose SSID: Choose an SSID to be configured.
Chapter 4 - Network Configuration Confidential and Proprietary Information of ZTE CORPORATION 19 ¾ Hide SSID: If this option is enabled, this SSID will not be searched by the wireless terminal devices. ¾ Enable SSID: Choose this option to enable this SSID. ¾ SSID Name: Input an SSID name (1~32 characters). ¾ Priority: Set a priority level: 0~7 Click Submit to complete the configuration of multiple-SSID settings. Checking Associated Device Follow the steps below: 1. Click Network > WLAN > Associated Device to open the configuration page of the associated device of wireless connection. 2. Choose an SSID and then click Refresh to refresh the address of the associated device. Configuring Access Control List 1. Click Network > WLAN > Access Control List to open the configuration page of the access control list of wireless connection. 2. Configure the parameters as described follows: ¾ Choose SSID: Choose an SSID. ¾ Mode: Select a mode (Disabled, Block, and Permit) ¾ MAC Address: Enter the MAC address of the device. 3. Click Add to finish the configuration of access control list.
Confidential and Proprietary Information of ZTE CORPORATION 20 Chapter 5 Application Configuration Configuring UPnP Follow the steps below: 1. Click Application > UPnP to open the UPnP configuration page. 2. Enable the UPnP function and specify the WAN connection type. 3. Click Submit to save the configurations. Configuring DMZ Host It is required to enable the DMZ host function in the case that W300 is operating in routing mode and a local host needs to be accessed by the external network. Follow the steps below: 1. Click Application > DMZ Host to open the DMZ host configuration page. 2. Enable the DMZ host function; select the WAN connection type and specify the DMZ host IP address. 3. Click Submit to save the configurations.
Confidential and Proprietary Information of ZTE CORPORATION 21 Chapter 6 Troubleshooting This chapter describes how to troubleshoot problems when installing and using a W300. For any problems not addressed here; contact the service provider for help. TABLE 4 TROUBLESHOOTING Problem Troubleshooting The power indicator is OFF when the device is powered on. Make sure to use the power adapter included in the package. Make sure that the adapter is connected properly to the device and the power outlet. The DSL indicator is OFF when the telephone line is connected. Make sure to use a standard telephone line (e.g., the companion telephone line). Make sure that the lines are connected properly. Check all the port connections. Wait for 60 seconds for the device to establish an ADSL connection. When the telephone line is connected, the DSL indicator is in slowly flashing status. It indicates the connection failure between the device and the office-end DSLAM. Please make sure that the lines are connected properly. If a telephone is required to be installed in front of the splitter, make sure to install a voice filter properly. The LAN indicator is OFF when the Ethernet cable is connected. Make sure that the Ethernet cable is connected properly to the computer and the W300 router. Make sure that the device and computer are all powered on. WLAN is unable to be connected Make sure that the Wi-Fi indicator is ON. Make sure that the wireless network adapter is set properly. Check the network name, encryption mode, and encryption key to make sure that they are matched the settings of the W300 router. PC is unable to access the network  Use the ping command to check if the IP address of the network port of the W300 (192.168.1.1 by default) can be pinged through from the computer. If it cannot be pinged through successfully, check the Ethernet connection and whether the indicator status is normal.  It is recommended that the local IP address and DNS server address are set to be obtained automatically.  It is recommended to close all the running firewall and VPN software.  It is required to disable the proxy server setting of the Web browser (e.g., IE).  The failure reason may be that the office-end devices of the ADSL service provider are being upgraded or in maintenance.
Confidential and Proprietary Information of ZTE CORPORATION 22 Appendix A WLAN Configuration To access the W300 router in the wireless way, users need to configure WLAN settings for computer. The following example assumes that a laptop computer with a built-in wireless network adatper is used and the operating system is Windows XP. Follow the steps below to configure WLAN on computer: 1. From the Windows taskbar, click Start > Control Panel. 2. Double-click the Network Connections icon to open the Network Connections window. 3. Right-click the Wireless Network Connection icon and choose Properties from the pop-up short-cut menu to open the Wireless Network Connection Properties page. 4. In the Wireless Network Connection Properties page, click the General tab, and set the wireless network apater to obtain the IP address and DNS server address from the W300 router automatically via DHCP. 5. In the Wireless Network Connection Properties page, click the Wireless Networks tab, and check Use Windows to configure my wireless network settings, as shown in Figure 18.
Appendix A - WLAN Configuration Confidential and Proprietary Information of ZTE CORPORATION 23 FIGURE 18 WIRELESS NETWORKS 6. Check if the desired WLAN SSID is included in the Preferred networks area. If yes, select it. If no, click the Add button to open the configuration page shown in Figure 19. FIGURE 19 ASSOCIATION TAB (WIRELESS NETWORK PROPERTIES)
ZXV10 W300 Wireless ADSL Router User Manual 24 Confidential and Proprietary Information of ZTE CORPORATION 7. In the Network name (SSID) field, input an SSID (the same as the one set for the W300 router, case sensitive). If the W300 router enables wireless security, supposing that the user adopts WEP 64-bit as Authentication Type and Ee68o as Encryption key, select Open for Network Authentication and WEP for Data encryption. Uncheck The key is provided for me automatically. In the Network key fields, input Ee68o, and then click OK to return. 8. Click the View Wireless Networks button to view the wireless network list, as shown in Figure 20. FIGURE 20 VIEWING WIRELESS NETWORKS 9. Check the wireless network list to see whether the newly added wireless network connection exists. If not, click Refresh network list in the left pane of Figure 21. If the wireless network is found, select it and then click the Connect button on the bottom of the page. Figure 22 shows the wireless connection status after it is successfully connected with the computer.
Appendix A - WLAN Configuration Confidential and Proprietary Information of ZTE CORPORATION 25 FIGURE 21 CHOOSING WIRELESS NETWORK FIGURE 22 SUCCESSFUL WIRELESS CONNECTION

Navigation menu